Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-105
 coDot11StationName
.1.3.6.1.4.1.8744.5.4.1.5.1.26 read-only
Name of the associated station.
 coDot11StationIPAddress
.1.3.6.1.4.1.8744.5.4.1.5.1.27 read-only
IP address of the associated station.
 coDot11StationVLAN
.1.3.6.1.4.1.8744.5.4.1.5.1.28 read-only
VLAN ID of the associated station. This object is always available on autonomous APs.
However, on access-controller APs, this object is only available under certain conditions,
when the client station is connected to a profile that is not access-controlled.
 coDot11StationLocalInterface
.1.3.6.1.4.1.8744.5.4.1.5.1.29 read-only
Specifies the Local Interface where the associated station traffic will be forwarded to.
 coDot11StaHT
.1.3.6.1.4.1.8744.5.4.1.5.1.30 read-only
Indicates that the associated station is HT.
 coDot11StaEncryptionType
.1.3.6.1.4.1.8744.5.4.1.5.1.31 read-only
Indicates the encryption type used by the wireless station.
 coDot11PktsTxRate1
.1.3.6.1.4.1.8744.5.4.1.5.1.32 read-only
Number of frames transmitted at 1 Mbps.
 coDot11PktsTxRate2
.1.3.6.1.4.1.8744.5.4.1.5.1.33 read-only
Number of frames transmitted at 2 Mbps.
 coDot11PktsTxRate5dot5
.1.3.6.1.4.1.8744.5.4.1.5.1.34 read-only
Number of frames transmitted at 5.5 Mbps.
 coDot11PktsTxRate11
.1.3.6.1.4.1.8744.5.4.1.5.1.35 read-only
Number of frames transmitted at 11 Mbps.
 coDot11PktsTxRate6
.1.3.6.1.4.1.8744.5.4.1.5.1.36 read-only
Number of frames transmitted at 6 Mbps.
 coDot11PktsTxRate9
.1.3.6.1.4.1.8744.5.4.1.5.1.37 read-only
Number of frames transmitted at 9 Mbps.