Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-99
 coDot11DTIMPeriod
.1.3.6.1.4.1.8744.5.4.1.1.1.3 read-write
Specifies the number of beacon intervals that elapse between transmission of Beacons
frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in
the DTIM Period field of Beacon frames. Client stations use the DTIM to wake up from
low-power mode to receive multicast traffic.
 coDot11PrivacyOptionImplemented
.1.3.6.1.4.1.8744.5.4.1.1.1.4 read-only
Indicates if the IEEE 802.11 WEP option is enabled.
 coDot11RSNAOptionImplemented
.1.3.6.1.4.1.8744.5.4.1.1.1.5 read-only
Indicates if the profile is RSNA-capable.
 coDot11NumberOfUsers
.1.3.6.1.4.1.8744.5.4.1.1.1.6 read-only
Indicates the number of users connected via this profile.
 coDot11AddToAssociationNotification
.1.3.6.1.4.1.8744.5.4.1.1.1.7 read-write
Specifies if an association trap notification is sent each time a user connects to this
profile.
 coDot11PhyTxPowerAdminLevel
.1.3.6.1.4.1.8744.5.4.1.1.1.8 read-write
Specifies the transmission power of the radio.
 coDot11PhyTxPowerOperLevel
.1.3.6.1.4.1.8744.5.4.1.1.1.9 read-only
Indicates the transmission power of the radio.
 coDot11CurrentSNRLevel
.1.3.6.1.4.1.8744.5.4.1.1.1.10 read-only
Average SNR level for all the connected client stations.
 coDot11BSSID
.1.3.6.1.4.1.8744.5.4.1.1.1.11 read-only
MAC Address assigned to this device.
 coDot11AdminMinimumDataRate
.1.3.6.1.4.1.8744.5.4.1.1.1.12 read-write
Specifies the minimum transmission rate that clients stations must meet in order to
connect with this profile. Client stations that are below this setting will not be able to
connect.
The value of this object must always be less or equal than the value of
coDot11MaximumDataRate.
Allowed values will change according to the state of the radio’s wireless mode
(coDot11CurrentOperPHYType).
ieee802dot11b: Lowest, 1, 2, 5.5, 11 Mbps
ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, 54 Mbps