Reference Guide

ManualsBrandsHP ManualsSoftwareHP ProCurve Guest Management Software

111

112

113

114

115

116

117

118

119

120

MIB descriptions

HP-WLAN-NEIGHBORHOOD-MIB

3-94

 hpWlanNeighborhoodControlledApTotalRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.2 read-only

Indicates the total number of radios within a controlled access point.

 hpWlanNeighborhoodControlledApAverageDetectionTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.3 read-only

Indicates the average time (in seconds) it takes the radios of a controlled access point to

detect a rogue access point.

 hpWlanNeighborhoodControlledApMaximumDetectionTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.4 read-only

Indicates the maximum time (in seconds) it takes the radios of a controlled access point

to detect a rogue access point.

hpWlanNeighborhoodRadioMapTable

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3 not-accessible

Statistics for each radio that has been discovered by the controller.

 hpWlanNeighborhoodRadioMapEntry

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1 not-accessible

An entry in the hpWlanNeighborhood.

 hpWlanNeighborhoodRadioMapBaseBssid

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.1 read-only

Indicates theBase Basic Service Set Identifier assigned to the radio.

 hpWlanNeighborhoodRadioMapBand

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.2 read-only

Indicates the wireless operating band for the radio (e.g. 2.4Ghz, 5Ghz).

 hpWlanNeighborhoodRadioMapPrimaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.3 read-only

Indicates the primary channel used by the radio.

 hpWlanNeighborhoodRadioMapSecondaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.4 read-only

Indicates the secondary channel used by the radio for channel bonding when providing

service in a 40MHz wide channel.

 hpWlanNeighborhoodRadioMapTrafficShapingMode

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.5 read-write

Sets the mode in which the radio’s traffic shaping feature is set to operate.

 hpWlanNeighborhoodRadioMapLastActiveTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.6 read-only

Timestamp for the most recent date and time that a radio was known to be active in the

RF environment. This corresponds to the date and time that a beacon frame was

transmitted by a controlled access point, or to the date and time a beacon from the radio

was received by a controlled access point.