Reference Guide
MIB descriptions
HP-WLAN-NEIGHBORHOOD-MIB
3-93
hpWlanNeighborhoodRrmEnabledRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.2 read-only
Indicates the number of enabled radios managed by the Radio Resource Management system.
hpWlanNeighborhoodRrmConfigChangedRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.3 read-only
Indicates the number of radios managed by the Radio Resource Management system for which
there is a difference between the current and planned configuration (transmitting power and/or
operating channel).
hpWlanNeighborhoodRrmDfsChannelChangedRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.4 read-only
Indicates the number of radios managed by the Radio Resource Management system which
detected a radar signal and performed a channel change for DFS reasons.
hpWlanNeighborhoodRrmNewRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.5 read-only
Indicates the number of radios managed by the Radio Resource Management (RRM) system
which are new since the last RRM analysis was run.
hpWlanNeighborhoodRrmDisabledRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.6 read-only
Indicates the number of radios managed by the Radio Resource Management (RRM) system
which have been disabled since the last RRM analysis was run.
hpWlanNeighborhoodRrmMissingNeighborRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.7 read-only
Indicates the number of non-controlled neighbor radios managed by the Radio Resource
Management system which are missing from the current network map in comparison to the last
applied persistent baseline network map.
hpWlanNeighborhoodRrmNewNeighborRadiosNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.8 read-only
Indicates the number of non-controlled neighbor radios managed by the Radio Resource
Management system which are new to the current network map in comparison to the last
applied persistent baseline network map.
hpWlanNeighborhoodControlledApTable
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2 not-accessible
Statistics for each controlled access point discovered by a controller.
hpWlanNeighborhoodControlledApEntry
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1 not-accessible
An entry in the hpWlanNeighborhoodControlledApTable.
hpWlanNeighborhoodControlledApRadiosScanningNumber
.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.1 read-only
Indicates the number of radios within a controlled access point which are scanning as
part of the Intrusion Detection System.