Reference Guide

Introduction
About this guide
1-3
“WW” identifies worldwide regions not otherwise explicitly named.
Note  All references to the MSM320 also apply to the MSM325.
 All references to the MSM466 also apply to the MSM466-R.
Important terms
The following terms are used in this guide.
Conventions
Command syntax
Command syntax is formatted in a monospaced font as follows:
Term Description
AP
MSM AP
These terms are used interchangeably to refer to any HP
MSM3xx or MSM4xx Access Point, or the MSM317 Access
Device.
Non-HP access points are identified as third-party APs. These
APs do not support controlled mode operation.
controller,
MSM Controller
These terms are used interchangeably to refer to any
HP MSM7xx Controller, including both Access Controller and
Mobility Controller variants.
local mesh
WDS
wireless links
These terms are used interchangeably to refer to the local mesh
feature.
VSC
Virtual AP
VAP
These terms are used interchangeably to refer to a
VSC (Virtual Service Community).
Example Description
use-access-list
Command name. Specify it as shown.
ip_address
Items in italics are parameters for which you must
supply a value.
ssl-certificate=URL [%s]
Items enclosed in square brackets are optional. You
can either include them or not. Do not include the
brackets. In this example you can either include the
“%s” or omit it.
(ONE | TWO)
Items separated by a vertical line indicate a choice.
Specify only one of the items. Do not include the
vertical line.