Reference Guide

MIB descriptions
COLUBRIS-USER-SESSION-MIB
3-82
 coUserSessIndex
.1.3.6.1.4.1.8744.5.36.1.2.1.1.1 not-accessible
Index of a user in the coUserSessionTable.
 coUserSessUserName
.1.3.6.1.4.1.8744.5.36.1.2.1.1.2 read-only
Indicates the user’s name.
 coUserSessClientIpAddress
.1.3.6.1.4.1.8744.5.36.1.2.1.1.3 read-only
Indicates the user’s IP address.
 coUserSessSessionDuration
.1.3.6.1.4.1.8744.5.36.1.2.1.1.4 read-only
Indicates how long the user’s session has been active. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
 coUserSessIdleTime
.1.3.6.1.4.1.8744.5.36.1.2.1.1.5 read-only
Indicates for how long the user’s session has been idle. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
 coUserSessMAPGroupName
.1.3.6.1.4.1.8744.5.36.1.2.1.1.6 read-only
Indicates the user’s MultiService Access Point Group Name.
 coUserSessVSCName
.1.3.6.1.4.1.8744.5.36.1.2.1.1.7 read-only
Indicates the user’s Virtual Service Community Name.
 coUserSessSSID
.1.3.6.1.4.1.8744.5.36.1.2.1.1.8 read-only
Indicates the user’s Access Point SSID (ONLY when Location-aware is enabled and
properly configured). If this information is not available, a zero-Length string is returned.
 coUserSessVLAN
.1.3.6.1.4.1.8744.5.36.1.2.1.1.9 read-only
For access-controlled users, this value indicates the downstream VLAN currently
assigned to the user.
For non-access-controlled users, it indicates the user VLAN.
 coUserSessPHYType
.1.3.6.1.4.1.8744.5.36.1.2.1.1.10 read-only
Specifies the user’s radio type.
 coUserSessAuthType
.1.3.6.1.4.1.8744.5.36.1.2.1.1.11 read-only
User’s authentication type.
 coUserSessCalledStationID
.1.3.6.1.4.1.8744.5.36.1.2.1.1.12 read-only
Indicates the user’s called station ID.