Reference Guide

MIB descriptions
COLUBRIS-BANDWIDTH-CONTROL-MIB
3-80
COLUBRIS-BANDWIDTH-CONTROL-MIB
This MIB provides information on the bandwidth control settings active on an HP device.
COLUBRIS-BANDWIDTH-CONTROL-MIB OIDs
coBandwidthControlEnable
.1.3.6.1.4.1.8744.5.14.1.1.1 read-only
Indicates if bandwidth control is enabled or disabled on the Internet port.
coBandwidthControlMaxTransmitRate
.1.3.6.1.4.1.8744.5.14.1.1.2 read-only
Indicates the maximum rate at which data can be transmitted on the Internet port. If traffic
exceeds this rate for short bursts, it is buffered. Long overages will result in data being
dropped.
coBandwidthControlMaxReceiveRate
.1.3.6.1.4.1.8744.5.14.1.1.3 read-only
Indicates the maximum rate at which data can be received on the Internet port. If traffic
exceeds this rate for short bursts it is buffered. Long overages will result in data being dropped.
coBandwidthControlLevelTable
.1.3.6.1.4.1.8744.5.14.1.1.4 not-accessible
A table defining the current bandwidth level settings that are active on the device.
 coBandwidthControlLevelEntry
.1.3.6.1.4.1.8744.5.14.1.1.4.1 not-accessible
An entry in the coBandwidthControlLevelTable. coBandwidthControlLevelIndex -
Uniquely access a definition for this particular bandwidth control level.
 coBandwidthControlLevelIndex
.1.3.6.1.4.1.8744.5.14.1.1.4.1.1 not-accessible
Specifies the level index. Each index defines a bandwidth level that traffic can be
assigned to. Four indexes are defined (1 to 4) with the following meanings: 1-Low, 2-
Normal, 3- High, 4-Very High.
 coBandwidthControlLevelMinTransmitRate
.1.3.6.1.4.1.8744.5.14.1.1.4.1.2 read-only
Specify the minimum transmit rate for the level as a percentage of
coBandwidthControlMaxTransmitRate. This is the minimum amount of bandwidth that
will be assigned to a level as soon as outgoing traffic is present on the level.
 coBandwidthControlLevelMaxTransmitRate
.1.3.6.1.4.1.8744.5.14.1.1.4.1.3 read-only
Specify the maximum transmit rate for the specified level as a percentage of
coBandwidthControlMaxTransmitRate. This is the maximum amount of outgoing
bandwidth that can be consumed by the level. Traffic in excess will be buffered for short
bursts, and dropped for sustained overages