Reference Guide
MIB descriptions
COLUBRIS-MAINTENANCE-MIB
3-77
COLUBRIS-MAINTENANCE-MIB OIDs
firmwarePeriodicUpdate
.1.3.6.1.4.1.8744.5.2.1.1.1 read-write
Specifies if firmware updates are automatically triggered on a periodic basis or not.
’true’: Automatically update the firmware based on the information specified in the
firmwareUpdateDay and firmwareUpdateTime attributes.
’false’: No firmware update is triggered unless a request is specifically issued using the
firmwareUpdateInitiate attribute.
firmwareUpdateDay
.1.3.6.1.4.1.8744.5.2.1.1.2 read-write
When firmwarePeriodicUpdate is set to true, this attribute specifies the day that automatic
updates will occur.
firmwareUpdateTime
.1.3.6.1.4.1.8744.5.2.1.1.3 read-write
When firmwarePeriodicUpdate is set to true, this attribute specifies the time of the day that
automatic updates will occur. Specify the time in hours (00-23) and minutes (00-59) in the
format HH:MM. The ’:’ character is mandatory between the fields.
firmwareUpdateLocation
.1.3.6.1.4.1.8744.5.2.1.1.4 read-write
Specifies the URL where the new firmware file is located. This is used when the firmware
update is triggered manually or automatically on a periodic basis.
firmwareUpdateInitiate
.1.3.6.1.4.1.8744.5.2.1.1.5 read-write
Triggers a firmware update using the firmware specified in the firmwareUpdateLocation
attribute. Reading this attribute always returns ’idle’.
firmwareUpdateNotificationEnabled
.1.3.6.1.4.1.8744.5.2.1.1.6 read-write
Specifies if firmwareUpdateNotification notifications are generated.
firmwareUpdateInfo
.1.3.6.1.4.1.8744.5.2.1.1.7 read-only
Contains various information about the firmware update and is used with firmware update
notifications to provide more detailed information.
firmwareUpdateStatus
.1.3.6.1.4.1.8744.5.2.1.1.8 read-only
Contains the status of the current or last firmware download. A Textual error message is
available in firmwareUpdateInfo.
configurationPeriodicUpdate
.1.3.6.1.4.1.8744.5.2.1.2.1 read-write
Specifies if configuration file updates are automatically triggered on a periodic basis or not.
’true’: Automatically update the configuration file based on the information specified in the
configurationUpdateDay and configurationUpdateTime attributes.