Reference Guide

ManualsBrandsHP ManualsSoftwareHP ProCurve Guest Management Software

101

102

103

104

105

106

107

108

109

110

MIB descriptions

COLUBRIS-PUBLIC-ACCESS-RETENTION-MIB

3-75

 publicAccessRetentionSessionUserName

.1.3.6.1.4.1.8744.5.15.1.1.3.1.3 read-only

Indicates the last username used for RADIUS authentication.

 publicAccessRetentionSessionStartTime

.1.3.6.1.4.1.8744.5.15.1.1.3.1.4 read-only

Indicates when this user session was started.

 publicAccessRetentionSessionDuration

.1.3.6.1.4.1.8744.5.15.1.1.3.1.5 read-only

Indicates how long the user’s session has been active. When this counter reaches its

maximum value, it wraps around and starts increasing again from zero.

 publicAccessRetentionSessionStationIpAddress

.1.3.6.1.4.1.8744.5.15.1.1.3.1.6 read-only

Indicates the user’s IP address.

 publicAccessRetentionSessionPacketsSent

.1.3.6.1.4.1.8744.5.15.1.1.3.1.7 read-only

Indicates the total number of IP packets sent by the user. When this counter reaches its

maximum value, it wraps around and starts increasing again from zero.

 publicAccessRetentionSessionPacketsReceived

.1.3.6.1.4.1.8744.5.15.1.1.3.1.8 read-only

Indicates the total number of IP packets received by the user. When this counter reaches

its maximum value, it wraps around and starts increasing again from zero.

 publicAccessRetentionSessionBytesSent

.1.3.6.1.4.1.8744.5.15.1.1.3.1.9 read-only

Indicates the total number of bytes sent by the user. When this counter reaches its

maximum value, it wraps around and starts increasing again from zero.

 publicAccessRetentionSessionBytesReceived

.1.3.6.1.4.1.8744.5.15.1.1.3.1.10 read-only

Indicates the total number of bytes received by the user. When this counter reaches its

maximum value, it wraps around and starts increasing again from zero.

 publicAccessRetentionSessionSSID

.1.3.6.1.4.1.8744.5.15.1.1.3.1.11 read-only

Indicates the user’s Access Point SSID (ONLY when Location-aware is enabled and

properly configured). If this information is not available, a zero-length string will be

returned.

publicAccessRetentionPeriodicStatsMaxCount

.1.3.6.1.4.1.8744.5.15.1.2.1 read-write

Specifies the maximum number of periods to keep inside the table.

publicAccessRetentionPeriodicStatsDuration

.1.3.6.1.4.1.8744.5.15.1.2.2 read-write

Specifies the amount of time for a period of an entry inside the table. Changing the value will

erase the table contents.