Administrator's Guide

Guest Management Software Administrator Guide 40 3 Working with the Guest Management Software
2. Enable the Remote syslog destination option.
3. Set the Server address field to the IP address of the computer that is running the Guest
Management Software.
4. Define the User tracking filter if you want to reduce the number of logs that are sent. If the
filter is blank, all logs are sent.
5. Select Save.
Setting tracking on a single station
When the Guest Management Software is installed on a single computer:
1. Select File > Preferences > Application options.
2. Under User tracking server:
Enable Activate user tracking server.
Leave Server hostname blank.
Set the Server UDP port field to match the setting on the controller.
3. Select OK.