Administrator's Guide

Guest Management Software Administrator Guide 12 2 Installation
D. Addition of a controller to the database
This step is optional. Controllers can be added later if desired.
Note: Before adding a controller, make sure that no user is currently logged in to the
controller management tool.
After the CA certificate has been created, the Add Service Controller Wizard starts. Define
the settings for a controller on your network and select Finish. The HTTPS TCP port and
SOAP TCP port fields are both predefined, at 443 and 448 respectively.
When selected, Display and confirm the service controller’s certificate ensures increased
security. For example, you can create certificates and digitally sign them. Because this
signature appears on each certificate when it is displayed, a different signature appearing on a
certificate would indicate suspicious behavior, such as a compromised or hacked device being
used to connect to the service.
If you specify a static IP address in the Specify Service Controller information window, a
Warning appears:
Select Yes to continue.