Instruction Manual

Select To do this
NOTE: Availability of the options above varies by
computer model.
Enable/disable HP DayStarter (enabled by default).
Enable/disable HP FastLook (enabled by default).
Enable/disable Preboot Authentication on HP FastLook
Boot (disabled by default).
Enable/disable Virtualization Technology (select models
only; disabled by default).
Enable/disable HP QuickWeb (enabled by default).
Enable/disable HP QuickWeb write protect (disabled by
default).
Enable/disable Multi Core CPU (enabled by default).
Enable/disable Intel® HT Technology (enabled by
default).
Enable/disable wake on USB (enabled by default).
Enable/disable Unified Extensible Firmware Interface
(UEFI) mode (disabled by default).
Turn the Numlock state at boot on or off.
118 Chapter 13 Computer Setup