Specifications

Top cover
NOTE: The top cover spare part kit includes the TouchPad but not the TouchPad cables. The
TouchPad cables are included with the TouchPad button board. For more information about the
TouchPad button board, see
TouchPad button board on page 61.
Description Spare part number
Top cover for use with Compaq models 689696-001
Top cover for use with black HP models 689695-001
Top cover for use with blue HP models 689694-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 32), and then remove the following components:
●
Memory module/wireless module compartment cover (see
WLAN module on page 41)
●
Hard drive (see
Hard drive on page 46)
●
Keyboard (see
Keyboard on page 51)
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Power button board and cable (see
Power button board on page 59)
●
TouchPad button board and cables (see
TouchPad button board on page 61)
To remove the top cover:
1. Close the computer, and then turn the computer upside down with the front toward you.
Component replacement procedures 55