Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

630 Fabric OS Message Reference
53-1002149-01
SPC-3005
98
SPC-3005
Message <timestamp>, [SPC-3005], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>:DEK inject error: <SP status code>,
DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK octet 4>.
Probable Cause Indicates the cause depends on the SP status code:
• 14 - Attempt to inject a DEK to an invalid FPGA table index
• 14 - Invalid input DEK format
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid KEK format
Recommended
Action
Contact technical support.
Severity ERROR
SPC-3006
Message <timestamp>, [SPC-3006], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>:DEK rewrap error: <SP status code>,
DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK octet 4>.
Probable Cause Indicates the cause depends on the SP status code:
• 2 - Invalid input DEK format
• 14 - Rewrapping not allowed: primary KEK generation is in progress
• 31 - DEK could not be wrapped
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid KEK format
Recommended
Action
For status code 14, complete primary KEK generation; otherwise, contact technical support.
Severity ERROR
SPC-3007
Message <timestamp>, [SPC-3007], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: DEK create error: <SP status code>,
info: <other info>.
Probable Cause Indicates the cause depends on the SP status code:
• 2 - Invalid input DEK specification
• 21 - No primary KEK exists with which to wrap the DEK