Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 601
53-1002149-01
SEC-1302
95
SEC-1302
Message <timestamp>, [SEC-1302], <sequence-number>,, INFO, <system-name>, This switch
does not have all the required PKI objects correctly installed.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity INFO
SEC-1303
Message <timestamp>, [SEC-1303], <sequence-number>,, INFO, <system-name>, This software
version does not support security.
Probable Cause Indicates the currently installed software version does not support the Brocade Secure Fabric OS
feature.
Recommended
Action
Run the firmwareDownload command to update the firmware to the latest version for your specific
switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature.
Severity INFO
SEC-1304
Message <timestamp>, [SEC-1304], <sequence-number>,, INFO, <system-name>, This switch has
no security license.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for
that specific switch.
Severity INFO
SEC-1305
Message <timestamp>, [SEC-1305], <sequence-number>,, INFO, <system-name>, This switch has
no zoning license.