Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 391
53-1002149-01
FW-1532
45
FW-1532
Message <timestamp>, [FW-1532], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of C3 transmit time out frames has dropped below upper threshold
boundary and is in between low and high thresholds.
Recommended
Action
Check the target device. It could be slow.
Severity INFO
FW-1533
Message <timestamp>, [FW-1533], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization crossed lower threshold boundary to in between low and high
thresholds.
Recommended
Action
No action is required.
Severity INFO
FW-1534
Message <timestamp>, [FW-1534], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization has dropped below upper threshold boundary to in between low
and high thresholds.
Recommended
Action
No action is required.
Severity INFO
FW-1535
Message <timestamp>, [FW-1535], <sequence-number>,, INFO, <system-name>, Fabric Watch has
stopped portfencing feature for <Area String> loss area in <Port Name> class since
FOS6.3. Disabling port fencing feature for this.
Probable Cause Indicates that in previous versions portfencing is configured for Link/Sync loss, but after upgrading
to new version, in which portfencing is not suppoted, resets the above bit.