HP Photosmart C7200 All-in-One series Basics Guide
Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
1 HP All-in-One overview The HP All-in-One at a glance....................................................................................................3 Control panel features................................................................................................................4 Find more information.................................................................................................................6 2 Network setup Wired network setup..............................................
Contents Avoid paper jams......................................................................................................................36 View and select photos.............................................................................................................36 Scan an image..........................................................................................................................38 Scan an original to a computer...............................................................
1 HP All-in-One overview Use the HP All-in-One to quickly and easily accomplish tasks such as making a copy, scanning documents, printing photos, or sending and receiving faxes You can access many HP All-in-One functions directly from the control panel, without turning on your computer. NOTE: This guide introduces basic operations and troubleshooting, as well as provides information for contacting HP support and ordering supplies.
Chapter 1 (continued) HP All-in-One overview * Label Description 8 Paper-length guide for the main input tray 9 Photo tray 10 Ink cartridge door 11 Front USB port for your camera or other storage device 12 Memory card slots and Photo light 13 Control panel 14 Glass 15 Lid backing 16 Ethernet port 17 Rear USB port 18 Power connection* 19 1-LINE (fax) and 2-EXT (phone) ports 20 Two-sided printing accessory Use only with the power adapter supplied by HP.
Label Name and Description 1 Display: Displays menus, photos, and messages. The angle of the display can be changed for better viewing. Place a finger in the indented area to the left of the display and then pull up. 2 Attention light: Indicates a problem occurred. See the display for more information. 3 Back: Returns to the previous screen on the display. 4 Directional pad: Allows you to navigate through menu options by pressing the up, down, left, or right arrow buttons.
Chapter 1 (continued) Label Name and Description 23 Print Photos: Depending on whether you access your photos from the View, Print, or Create menu, the Print Photos button will display the Print Preview screen or it will print any selected photo(s). If no photos are selected, a prompt appears asking if you want to print all the photos on your card or storage device. 24 Cancel: Stops the current operation.
2 Network setup This section describes how to connect the HP All-in-One to a network and how to view and manage network settings. If you want to: See this section: Connect to a wired (Ethernet) network. “Wired network setup” on page 7 Connect to a wireless network with a wireless router (infrastructure). “Integrated wireless WLAN 802.11 network setup” on page 9 Connect directly to a wireless-capable computer without a wireless router (ad hoc).
Chapter 2 What you need for a wired network Before you connect the HP All-in-One to a network, make sure you have all of the required materials. ❑ A functional Ethernet network that includes a router, switch, or hub with an Ethernet port. ❑ CAT-5 Ethernet cable. Network setup Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable. There is a different number of wires in each one, and each has a different connector.
2. Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One. Network setup 3. Connect the other end of the Ethernet cable to an available port on your Ethernet router, switch, or wireless router. 4. Once you have connected the HP All-in-One to the network, install the software as described in “Install the software for a network connection” on page 16. Integrated wireless WLAN 802.
Chapter 2 The advantages of a wireless infrastructure network as compared to an ad hoc network include: • • • • • Advanced network security Enhanced reliability Network flexibility Better performance, especially with 802.11 g mode Shared Broadband Internet access To set up the HP All-in-One on an integrated wireless WLAN 802.11 network, you need to do the following: See this section: First, collect all of the required materials. “What you need for an integrated wireless WLAN 802.
CAUTION: To prevent other users from accessing your wireless network, HP strongly recommends using a password or passphrase (WPA or WEP security) and a unique network name (SSID) for your wireless router. Your wireless router might have been shipped with a default network name, which is typically the manufacturer name. If you use the default network name, your network can be easily accessed by other users using the same default network name (SSID).
Chapter 2 c. When you have finished entering the new SSID, use the arrow buttons to highlight Done on the visual keyboard, and then press OK. TIP: If the HP All-in-One is unable to discover the network based on the network name you entered, you will see the following prompts. You may want to move the HP All-in-One closer to the computer and try running the Wireless Setup Wizard again to automatically discover the network. d. Press until Infrastructure is highlighted, and then press OK. e.
NOTE: An ad hoc connection is available if you do not have a wireless router or access point. However, it provides little flexibility, a low level of network security, and slower network performance than with a wireless router or access point. In order to connect the HP All-in-One to your computer (ad hoc), you need to create an ad hoc network profile on your computer. This includes choosing a network name (SSID) and WEP security (optional but recommended) for your ad hoc network.
Chapter 2 d. Make sure that the check box is not selected next to The key is provided for me automatically. If it is selected, click the check box to clear it. e. In the Network key box, type a WEP key that has exactly 5 or exactly 13 alphanumeric (ASCII) characters. For example, if you enter 5 characters, you might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination of your choosing.
3. Press to highlight Wireless Setup Wizard, and then press OK. This runs the Wireless Setup Wizard. The setup wizard searches for available networks, and then displays a list of detected network names (SSIDs). The infrastructure networks appear first in the list, followed by available ad hoc networks. The networks with the strongest signal appear first, the weakest appear last. 4. On the display, look for the network name you created on your computer (for example, Mynetwork). 5.
Chapter 2 Install the software for a network connection Use this section to install the HP All-in-One software on a computer connected to a network. Before you install the software, make sure you have connected the HP All-inOne to a network. NOTE: If your computer is configured to connect to a series of network drives, make sure that your computer is currently connected to these drives before installing the software.
Change the HP All-in-One from a USB connection to a network connection If you first install the HP All-in-One with a USB connection, you can later change to either a wireless or Ethernet network connection. If you already understand how to connect to a network, you can use the general directions below. NOTE: For optimal performance and security in your wireless network, use an access point (such as a wireless router) to connect the HP All-in-One.
Chapter 2 Use the Wireless Setup Wizard The Wireless Setup Wizard provides an easy way to set up and manage a wireless connection to the HP All-in-One. 1. On the control panel of the HP All-in-One, press Setup. 2. Press until Network is highlighted, and then press OK. 3. Press to highlight Wireless Setup Wizard, and then press OK. This runs the Wireless Setup Wizard.
3. Press 4. Press until Wireless Radio is highlighted, and then press OK. to highlight On or Off, and then press OK. Print the wireless network test The wireless network test performs a series of diagnostic tests to determine whether network setup is successful. The wireless network test prints automatically when the Wireless Setup Wizard is run. You also can print the wireless network test at any time. 1. On the control panel of the HP All-in-One, press Setup. 2.
Chapter 2 3. Press until Advanced Setup is highlighted, and then press OK. 4. Press until IP Settings is highlighted, and then press OK. If the HP All-in-One is already connected to a wired network, you are prompted to confirm that you want to change the IP settings. Press OK. 5. Press until Manual is highlighted, and then press OK. 6. Press to highlight one of the following IP settings, and then press OK. • IP Address • Subnet Mask • Default Gateway 7.
3 Fax setup After completing all the steps in the Setup Guide, use the instructions in this section to complete your fax setup. Please keep your Setup Guide for later use. In this section, you will learn how to set up the HP All-in-One so that faxing works successfully with equipment and services you might already have on the same phone line as the HP All-in-One.
Chapter 3 Austria www.hp.com/at/faxconfig Germany www.hp.com/de/faxconfig Switzerland (French) www.hp.com/ch/fr/faxconfig Switzerland (German) www.hp.com/ch/de/faxconfig United Kingdom www.hp.com/uk/faxconfig Spain www.hp.com/es/faxconfig The Netherlands www.hp.com/nl/faxconfig Belgium (France) www.hp.com/be/fr/faxconfig Belgium (Dutch) www.hp.com/be/nl/faxconfig Portugal www.hp.com/pt/faxconfig Sweden www.hp.com/se/faxconfig Finland www.hp.com/fi/faxconfig Denmark www.hp.
Figure 3-1 Back view of the HP All-in-One 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port To set up the HP All-in-One with a separate fax line 1. Using the phone cord supplied in the box with the HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP All-in-One.
Chapter 3 Figure 3-2 Back view of the HP All-in-One 1 Telephone wall jack 2 DSL filter and cord supplied by your DSL provider 3 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port To set up the HP All-in-One with DSL 1. Obtain a DSL filter from your DSL provider. 2.
• If you are using either a PBX or an ISDN converter/terminal adaptor, connect the HP All-in-One to the port that is designated for fax and phone use. Also, make sure that the terminal adapter is set to the correct switch type for your country/region, if possible. NOTE: Some ISDN systems allow you to configure the ports for specific phone equipment. For example, you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes.
Chapter 3 To set up the HP All-in-One with a distinctive ring service 1. Using the phone cord supplied in the box with the HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP All-in-One. NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP All-in-One, you might not be able to fax successfully.
To set up the HP All-in-One with a shared voice/fax line 1. Using the phone cord supplied in the box with the HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP All-in-One. NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP All-in-One, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. 2.
Chapter 3 Figure 3-5 Back view of the HP All-in-One 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port To set up the HP All-in-One with voice mail 1. Using the phone cord supplied in the box with the HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP All-in-One.
To set the answer mode ▲ Press Auto Answer to turn the light on or off, as appropriate for your setup. When the Auto Answer light is on, the HP All-in-One answers calls automatically. When the light is off, the HP All-in-One does not answer calls. Set the number of rings before answering If you turn on the Auto Answer setting, you can specify how many rings should occur before the HP All-in-One automatically answers the incoming call.
Chapter 3 Test your fax setup You can test your fax setup to check the status of the HP All-in-One and to make sure it is set up properly for faxing. Perform this test after you have completed setting up the HP All-in-One for faxing.
Fax setup 4. Use the visual keyboard to enter your personal or company name. When you are finished, highlight Done on the visual keyboard, and then press OK. 5. Enter your fax number by using the numeric keypad, and then press OK.
Use the HP All-in-One features 4 Use the HP All-in-One features This chapter includes information about how to use the HP All-in-One for basic operations. In addition, it provides instructions about how to load paper and replace the ink cartridges. Load originals and load paper You can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, legal paper, photo paper, transparencies, envelopes, and HP CD/DVD tattoo labels.
NOTE: Remove all originals from the document feeder tray before lifting the lid on the HP All-in-One. Load an original on the glass You can copy, scan, or fax up to letter- or A4-size originals by loading them on the glass. If your original is legal-size or contains multiple full-size pages, load it in the automatic document feeder. NOTE: Many of the special features will not work correctly if the glass and lid backing are not clean. To load an original on the scanner glass 1.
Chapter 4 Use the HP All-in-One features 2. Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: • Make sure it is free of rips, dust, wrinkles, and curled or bent edges. • Make sure all the paper in the stack is the same size and type. 3. Insert the stack of paper into the main input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops.
Use the HP All-in-One features 5. Push the main input tray back into the HP All-in-One. 6. Pull the output tray extender toward you, as far as it will go. NOTE: When you use legal-size paper, leave the tray extender closed. Load 10 x 15 cm (4 x 6 inch) photo paper You can load up to 10 x 15 cm (4 x 6 inch) photo paper into the photo tray of the HP Allin-One. For the best results, use 10 x 15 cm (4 x 6 inch) HP Premium Plus Photo Paper or HP Premium Photo Paper.
Chapter 4 Use the HP All-in-One features 4. Push in the photo tray, and then lower the output tray. Avoid paper jams To help avoid paper jams, follow these guidelines. • • • • • • • • • Remove printed papers from the output tray frequently. Do not leave originals on the glass. If you load an original in the automatic document feeder while there is already an original on the glass, the original can jam in the automatic document feeder.
Use the HP All-in-One features 1 CompactFlash (CF) types I and II 2 Secure Digital (SD), Secure Digital Mini (adapter required), Secure Digital High Capacity (SDHC), MultiMediaCard (MMC), MMC Plus, MMC Mobile (RS-MMC; adapter required), TransFlash MicroSD Card, or Secure MultiMedia Card 3 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate, Memory Stick Duo or Duo Pro (adapter optional), or Memory Stick Micro (adapter required) 4 Front USB port (for storage devices) 5 xD-Pi
Chapter 4 Use the HP All-in-One features 8. If you want to select additional photos to view and print, press to highlight Add More, press OK, and repeat steps 4–6. Or, once you're in the Add Photos screen, the quickest way to select multiple photos (if you don't need the option to edit them) is to press to select a photo, and then press or to scroll through more photos to select. 9. (Optional) If you want to check and/or modify any of your print settings, press to highlight Settings and press OK. 10.
NOTE: If the HP All-in-One is connected to a network, you can access the scanned image only if the card or device is being shared across the network. To save a scan to a memory card or storage device 1. Make sure your memory card is inserted into the appropriate slot on the HP All-inOne, or a storage device is connected to the front USB port. 2. Load your original print side down on the right front corner of the glass. 3. Press the Scan Menu button. 4.
Chapter 4 Use the HP All-in-One features To send a basic fax from the control panel 1. Load your originals print side up into the document feeder tray. If you are sending a single-page fax, such as a photograph, you can also load your original print side down on the glass. NOTE: If you are sending a multiple-page fax, you must load the originals in the document feeder tray. You cannot fax a multiple-page document from the glass. 2. Press Fax Menu.
Use the HP All-in-One features 4. Press any button to return to the Tools menu. TIP: You can also print a self-test report to see if ink cartridges might need to be replaced. Replace the ink cartridges Follow these instructions when you need to replace ink cartridges. NOTE: If you are installing ink cartridges in the HP All-in-One for the first time, be sure to use only the ink cartridges that came with the device.
Chapter 4 Use the HP All-in-One features 1 Ink cartridge latch for the black ink cartridge 2 Ink cartridge latches for the color ink cartridges 4. Pull the ink cartridge toward you out of its slot to remove it. 5. Remove the new ink cartridge from its packaging, and then, holding it by the handle, push the ink cartridge into the empty slot. Match the color and pattern of the ink cartridge to the color and pattern on the print carriage. 6. Close the latch and make sure it is secure.
Use the HP All-in-One features 7. Repeat steps 3 through 6 for each ink cartridge you are replacing. 8. Close the ink cartridge door. Clean the HP All-in-One To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP All-in-One. TIP: You can purchase an HP Cleaning Kit for Inkjet Printers and All-in-Ones (Q6260A) that provides everything needed to safely clean your HP device. For more information, go to: www.
Chapter 4 3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting. 4. Turn on the HP All-in-One. Use the HP All-in-One features To clean the glass strip inside the automatic document feeder 1. Turn off the HP All-in-One. 2. Lift the cover of the automatic document feeder. 3. Lift the automatic document feeder mechanism. There is a glass strip under the automatic document feeder mechanism. 4.
CAUTION: Do not use paper-based wipes, as these might scratch the backing. 4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP Allin-One, as this might damage the device. Clean the HP All-in-One 45 Use the HP All-in-One features To clean the lid backing 1. Turn off the HP All-in-One, and raise the lid. 2.
5 Troubleshooting and support This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software. This chapter also provides warranty and support information. For support contact information, see the inside back cover of this guide.
• • • 1 Power connection 2 Power cord and adapter 3 Grounded power outlet If you are using a power strip, make sure the power strip is on. Or, try plugging the HP Allin-One directly into a grounded power outlet. Test the power outlet to make sure it is working. Plug in an appliance that you know works, and see if the appliance has power. If not, then there might be a problem with the power outlet. If you plugged the HP All-in-One into a switched outlet, make sure the switch is on.
Chapter 5 computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer. Troubleshooting and support For more information on installing the software and connecting the USB cable, see the Setup Guide that came with the HP All-in-One. The display shows the wrong language Solution: You can change the language settings at any time from the Preferences menu. To set your language and country/region 1. Press Setup. 2.
I received a message on the display about a paper jam or a blocked print head assembly Solution: If either a paper jam or blocked print head assembly error message appears on the display, there might be some packing material inside the HP All-in-One. Open the ink cartridge door, and check for obstructions in the device. Remove any packing materials or other obstructions.
Chapter 5 The computer is unable to discover the HP All-in-One Cause: Cables are not connected properly. Solution: Check the following cables to ensure they are connected properly. • Cables between the HP All-in-One and the hub or router • Cables between the hub or router and your computer • Cables to and from your modem or HP All-in-One Internet connection (if applicable) Cause: Your computer's Local Area Network card (LAN card) is not set up properly.
Solution: Turn on the HP All-in-One. Cause: You do not have an active network connection. Solution: Make sure you have an active network connection. Cause: Cables are not connected properly.
Chapter 5 Solution: Access the router's Embedded Web Server and turn on the Broadcast SSID option. See the user guide that came with your wireless router for information on how to access the Embedded Web Server and check the Broadcast SSID setting. For more information, see: “Connect to an integrated wireless WLAN 802.11 network” on page 10 Troubleshooting and support Cause: The wireless router (infrastructure) or computer (ad hoc) is too far from the HP All-inOne or there is interference.
router, make sure the MAC address of the HP All-in-One is on the list of acceptable MAC addresses. Invalid WEP key during wireless setup Cause: If you are using WEP security, you might have entered the WEP key incorrectly during the wireless setup process. Solution: Some wireless routers provide up to four WEP keys. The HP All-in-One uses the first WEP key (selected by the wireless router as the default WEP key).
Chapter 5 The Printer Not Found screen appears during installation Cause: A firewall, anti-virus, or anti-spyware application is preventing the HP All-in-One from accessing your computer. Solution: Uninstall the HP All-in-One software, and then reboot your computer. Temporarily disable the firewall, anti-virus, or anti-spyware, and then reinstall the HP All-in-One software. You can re-enable your firewall, anti-virus, or anti-spyware application after installation is complete.
• • “The "Dial Tone Detection" test failed” on page 58 “The "Fax Line Condition" test failed” on page 59 The "Fax Hardware Test" failed. Solution • Turn off the HP All-in-One by using the On button located on the control panel and then unplug the power cord from the back of the HP All-in-One. After a few seconds, plug the power cord back in and turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting information in this section.
Chapter 5 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One Troubleshooting and support • If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the HP All-in-One directly to the telephone wall jack.
2. 3. • • 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port After you have connected the phone cord to the port labeled 1-LINE, run the fax test again to make sure it passes and the HP All-in-One is ready for faxing. Try to send or receive a test fax. Make sure you use the phone cord that came with the HP All-in-One.
Chapter 5 2 • Phone cord supplied in the box with the HP All-in-One Check the connection between the telephone wall jack and the HP All-in-One to make sure the phone cord is secure. The "Dial Tone Detection" test failed Troubleshooting and support Solution • Other equipment, which uses the same phone line as the HP All-in-One, might be causing the test to fail.
• Check to make sure the country/region setting is set appropriately for your country/region. If the country/region setting is not set or is set incorrectly, the test might fail and you might have problems sending and receiving faxes. • Make sure you connect the HP All-in-One to an analog phone line or you will not be able to send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone.
Chapter 5 Solution: Look at the display on the HP All-in-One. If the display is blank and the On button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected to the HP All-in-One and plugged into a power outlet. Press the On button to turn on the HP All-inOne. Cause: You are using a phone line splitter. Solution: A phone line splitter can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.
Solution • Make sure the HP All-in-One is connected to the port that is designated for fax and phone use. Also, make sure that the terminal adapter is set to the correct switch type for your country/region, if possible. NOTE: Some ISDN systems allow you to configure the ports for specific phone equipment. For example, you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes.
Chapter 5 If the problem persists, contact your Internet service provider. The HP All-in-One cannot send faxes, but can receive faxes Cause: The HP All-in-One is not set up properly for faxing. Solution: Follow the instructions provided in this guide to set up the HP All-in-One properly for faxing, based on the equipment and services you have on the same phone line as the HP Allin-One. Then, run a fax test to check the status of the HP All-in-One and to make sure you set it up properly.
feeder tray, or push the original farther into the tray. Once the HP All-in-One detects the original, a confirmation message appears on the display. The HP All-in-One cannot receive faxes, but can send faxes Cause: Auto Answer is turned off, which means that the HP All-in-One will not answer incoming calls. You must be available to respond in person to incoming fax calls, or the HP Allin-One will not answer the incoming fax call.
Chapter 5 Solution: If you have an answering machine on the same phone line with the HP All-in-One, do the following: • Disconnect the answering machine and then try receiving a fax. If faxing is successful without the answering machine, the answering machine might be causing the problem. • Reconnect the answering machine and record your outgoing message again. Record a message that is approximately 10 seconds in duration. Speak slowly and at a low volume when recording your message.
• The ink cartridge door is open. Close the ink cartridge door, as shown below: The print head assembly is stalled. Turn the HP All-in-One off, remove any objects that are blocking the print head assembly (including any packing materials), and then turn the HP Allin-One on again. Resolve any problems found. If there are any unprinted faxes stored in memory, the HP All-inOne will begin printing all stored faxes in memory.
Chapter 5 Clear paper jams If the paper was loaded in the input tray, you might need to clear the paper jam from the rear of the HP All-in-One. Paper can also jam in the automatic document feeder. Several common actions can cause paper to jam the automatic document feeder: • Placing too much paper in the document feeder tray. The automatic document feeder can hold up to 50 sheets of letter or A4 paper, or 35 sheets of legal paper. • Using paper that is too thick or too thin for the HP All-in-One.
Lift the automatic document feeder mechanism. 4. Gently pull out any paper that is jammed in the automatic document feeder mechanism. CAUTION: If the paper tears when you are removing it, check for torn pieces of paper that might remain inside the mechanism. If you do not remove all the pieces of paper from the automatic document feeder, more paper jams are likely to occur. 5. Lower the automatic document feeder mechanism, and then close the cover of the automatic document feeder.
Chapter 5 • • Do not clean the print head unnecessarily. This wastes ink and shortens the life of the cartridges. Handle ink cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary printing problems. Support process Troubleshooting and support If you have a problem, follow these steps: 1. Check the documentation that came with the HP All-in-One. 2. Visit the HP online support Web site at www.hp.com/support. HP online support is available to all HP customers.
6 Technical information The technical specifications and international regulatory information for the HP All-in-One are provided in this section. System requirements Software system requirements are located in the Readme file. Product specifications For product specifications, go to the HP Web site at www.hp.com/support. Paper specifications • Input tray capacity: Plain paper sheets: Up to 100 (20 lb./75 gsm. paper) • Output tray capacity: Plain paper sheets: Up to 50 (20 lb./75 gsm.
Chapter 6 ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency. For more information on ENERGY STAR guidelines, go to the following Web site: www.energystar.
Technical information Warranty Warranty 71
Chapter 6 Technical information 72 Technical information
