Basic manual

NOTE: Some firewalls continue to cause interference even after you disable them.
If you continue to have problems after configuring the firewall as described above,
you might need to uninstall the firewall software in order to use the product over the
network.
Advanced firewall information
The following ports are also used by your HP product and might need to be opened on
your firewall configuration. Incoming ports (UDP) are destination ports on the computer
while outgoing ports (TCP) are destination ports on the HP product.
• Incoming (UDP) ports: 137, 138, 161, 427
• Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500
The ports are used for the following functions:
Printing
•
UDP ports: 427, 137, 161
•
TCP port: 9100
Photo card upload
•
UDP ports: 137, 138, 427
•
TCP port: 139
Scanning
•
UDP port: 427
•
TCP ports: 9220, 9500
Product status
UDP port: 161
Faxing
•
UDP port: 427
•
TCP port: 9220
Product installation
UDP port: 427
Manage your network settings
The HP All-in-One control panel enables you to perform a variety of network management
tasks. This includes printing the network settings, restoring the network defaults, turning
the wireless radio on and off, and printing a wireless network test.
Print network settings
You can display a summary of the network settings on the HP All-in-One control panel,
or you can print a more detailed configuration page. The network configuration page lists
all of the important network settings such as the IP address, link speed, DNS, and mDNS.
1. Press Setup.
2. Press the down arrow button until Network is highlighted, and then press OK.
3. Press the down arrow button until View Network Settings is highlighted, and then
press OK.
4. Do one of the following:
• To display wired network settings, press the down arrow button until Display
Wired Summary is highlighted, and then press OK.
• To display wireless network settings, press the down arrow button until
Display Wireless Summary is highlighted, and then press OK.
• To print the network configuration page, press the down arrow button until
Print Network Configuration Page is highlighted, and then press OK.
Chapter 1
14 Network setup
Network setup