User's Guide

Chapter

PCI Error Handling Product Note

PCI Error Handling Documentation

0-1-1-10 6/0/9/1 26368 133 133 On Yes No Yes N/A PCI-X PCI-X

0-1-1-11 6/0/8/1 26112 133 133 Off No N/A N/A N/A PCI-X PCI-X

PCI-Express Slots Information

-----------------------------

Driver(s)

Capable

Slot Path Link Max Max Link Pwr Occu Susp OLAR OLD Mode

Spd Link Link Width

Spd Width

0-1-1-2 6/0/2/0/0/0 2.5 2.5 x8 x8 Off No N/A N/A N/A PCIe

0-1-1-3 6/0/4/0/0/0 2.5 2.5 x8 x1 On Yes N/A N/A N/A PCIe

0-1-1-4 6/0/5/0/0/0 2.5 2.5 x8 x8 Off No N/A N/A N/A PCIe

0-1-1-5 6/0/6/0/0/0 2.5 2.5 x8 x4 On Yes No Yes N/A PCIe

0-1-1-6 6/0/14/0/0/0 2.5 2.5 x8 x4 On Yes No Yes N/A PCIe

0-1-1-7 6/0/13/0/0/0 2.5 2.5 x8 x8 On Yes N/A N/A N/A PCIe

Recovery Using the Attention Button

To use the Attention Button to recover from a PCI error, refer to the Interface Card OL* Support Guide,

Manufacturing Part Number B2355-90862, for instructions on using the Attention Button, then use the

Attention Button to complete the same steps that are illustrated in “Recovery Using the olrad Command” on

page 10:

Step 1. Confirm the driver/card is suspended

Step 2. Confirm card is in an error state

Step 3. Power off the slot

Step 4. Confirm the slot power is off

Step 5. Resume the card

Step 6. Confirm the card has been resumed

PCI Error Handling Documentation

The documentation that supports this release of the PCI Error Handling feature consists of:

• PCI Error Handling Product Note, March 2007, Manufacturing Part Number 5992-0539 — available in

the High Availability category at http://docs.hp.com/en/ha.html

• SW Depot web page — available from the HP Software Depot at http://h20293.www2.hp.com