User's Manual

# /usr/bin/ps -ef | /usr/bin/grep cim | /usr/bin/grep -v grep
You should see the following processes listed:
root 1451 1 0 14:57:01 ? 3:16 /opt/wbem/lbin/cimserver
root 1452 1451 0 14:57:19 ? 0:00 /opt/wbem/sbin/cimservera
root 1454 1451 0 14:57:01 ? 3:16 /opt/wbem/lbin/cimprovagt 14 11 SFMProviderModule
root 1498 1451 0 14:58:41 ? 3:16 /opt/wbem/lbin/cimprovagt 19 18 Operating_SystemModule
If only the cimserver process is running, then you need to take the following action on the Utility Meter
(otherwise, skip this procedure):
1. Log on as root.
2. Kill the cimserver process by executing the command:
# /usr/bin/kill -9 process_id
Where process_id is the cimserver process id, such as 1451 in the above process listing.
3. Check if the WBEM service is still running by executing the command:
# /opt/meter/bin/monitor status
You should see output similar to:
Status:
tnameserv...running, pid=12775, responding
das_SERVER...running, pid=12787, collecting
transporter...running, pid=12802
monitor...running, pid=12870
wbem...not running
http...running
IMPORTANT: The WBEM service should not be running. If it is running, start this procedure over,
beginning at Step 2.
4. Then, after a short period of time (about five minutes), the WBEM service will be launched automatically
by the /opt/meter/bin/monitor script that was executed in Step 3. After waiting approximately
five minutes, execute the command:
# /usr/bin/ps -ef | /usr/bin/grep cim | /usr/bin/grep -v grep
You should see output similar to:
root 1551 1 0 14:57:01 ? 3:16 /opt/wbem/lbin/cimserver
root 1552 1551 0 14:57:19 ? 0:00 /opt/wbem/sbin/cimservera
root 1554 1551 0 14:57:01 ? 3:16 /opt/wbem/lbin/cimprovagt 14 11 SFMProviderModule
root 1598 1551 0 14:58:41 ? 3:16 /opt/wbem/lbin/cimprovagt 19 18 Operating_SystemModule
If you do not see the above CIM processes running, wait a few more minutes and execute the ps
command again.
5. Check if the WBEM service is running by executing the command:
# /opt/meter/bin/monitor status
You should see output similar to:
Status:
tnameserv...running, pid=12775, responding
das_SERVER...running, pid=12787, collecting
transporter...running, pid=12802
monitor...running, pid=12870
wbem...running
http...running
4.4 Verifying the CIM Server Software Is Operational 79