User's Manual

Figure 3-6 Configure Tab
3.4.1 Network Configuration
Use this task to view or change the Utility Meter software configuration. If you change the Utility Meter's
hostname or IP address, then you need to reconfigure all PPU partitions with the appropriate PPU Agent
software command, to point to the new Utility Meter hostname or IP address.
NOTE: Only existing PPU agents need to be reconfigured. PPU WBEM Partitions/Servers do not need to
be reconfigured.
IMPORTANT: This task only updates the parameters in the Utility Meter's configuration file
(/etc/opt/meter/meter.xml), and does not update any HP-UX network files directly. All network
parameters in the Utility Meter software must be identical to the Utility Meter's HP-UX network settings. For
details of configuring the Utility Meter's HP-UX network settings, see Configuring the HP-UX System Parameters.
Use this procedure to:
3.4 Utility Meter Configure Tasks 49