User's Manual

a. # /opt/meter/bin/monitor stop
b. # /opt/meter/bin/monitor start
5. In the Utility Meter GUI, click the Configure tab, and then click the Network Configuration task
button (right pane). The Network Configuration dialog box is displayed:
Figure 2-2 Network Configuration Dialog Box
6. Use the information from the Utility Meter Site Preparation Form to enter the following Utility Meter data
into the Network Configuration window. Note that many of these fields have values automatically
entered. (For more details about these fields, see Utility Meter Software Parameters)
NOTE: Changing the value of these fields does not change the value of any HP-UX system parameters.
• Hostname
• Domain Name
• IP Address
• Netmask
• Gateway
• Primary DNS Server
• Secondary DNS Server (optional)
2.7 Configuring the Utility Meter Parameters 33