Specifications

Tool & Testers
55
Enclosures IO Cards KVMs & Switches Mac Monitor Cables Power Cord Networking & Telephone SCSI Tool & Tester USB
50 34 29-33 14-15 20-23 27-28 34-43 44-46 53-56 47-50
On the web:
On the web:
www.sfcable.com
www.sfcable.com
Network Installation Kit
• Die sets:
RG-58, 59, 62.5
RG-58, 59, 62.5, 174 Fiber Optic
RG-174, 179, Belden 8218, Fiber Optic
RG-8, 11, 174, 179, 213
• 6.5” cable cutter
• Cable stripper with cutter
• Coaxial cable stripper
• Coaxial stripper
• 2 Screwdrivers
• Enhanced Network Cable Tester
• Punch down tool with 66/88/110 blades
• Hard plastic case with inner foam padding (375 x 253 x 48 mm)
• Crimping tool for 8P8C/RJ-45, 6P6C/RJ-12, 6p4c/RJ-11
• Crimping tool with interchangeable die for RG-58,59,62.5,174
252008 . . . . . . . . . $235.00
252008
Tool Kits
30D1-F1
30D1-E1
31D3-F1
31D3-CA
31D3-D1
31D3-G1
Testers
Testers
260101
260102
260103
260104
GIGAtest-E Cable Tester
• Main and remote units to test installed cable.
• Determines suitability of cabling for
10/100/1000 Base T networks.
• Compact and light weight design for easy storage.
260101 . . . . . . . . . $69.95
LANtest Kit
• Can test the grounding.
• Can test the correct pin confi guration of
10 Base T, 10 Base 2 Thin Ethernet cable,
RJ11/45 modular cables 356A, TIA-568A /
568B and Token Ring cable etc.
• Feature with auto or manual scan for pin-out indicators.
• A power switch is provided for saving battery power.
• Easy to verify cable continuity, open, short and miswire.
• With remote kit, it can remotely test cable up
to 100 ft. away either on wall plate or patch panel.
260102 . . . . . . . . . $69.95
LANtest Pro
The LAN test Pro is a small hand held tester
that enables the user to quickly read the status
of Ethernet twisted pair cables. It tests for
faults such as open circuits, shorts, crossed
pairs, reversed pairs, and split pairs in
seconds. The tone generator function can send a signal through
your installed cables and probe can then trace the cable to locate
the fault. The LANtest Pro includes one master unit and
one remote unit easily operated by one person
testing patch cords or installed cables. The small
remote unit is designed to slip into the master unit
to prevent loss or damage.
260103 . . . . . . . . . $98.00
LANtest Pro and Probe Kit
• Verifi cation of shield integrity.
• Debug mode for detailed fault identifi cation results.
• Easy to read fault display and high speed testing.
• Split pair fault detection at a minimum 40 cm cable length.
• Test for wiring faults of open, short, reversed, crossed and split pairs.
• Specially designed remote unit that enables one person to test installed
• Auto sleep mode and power off switch to decrease power consumption.
260104 . . . . . . . . . $154.00
Part No Description Price
30D1-E1 . . . . DB9 F/DB25 F Serial loop Back Tester . . . $4.41
30D1-F1 . . . . DB25 M Parallel loop Back Tester . . . . . $3.95
31D3-47200 . . DB25 M/F Loop Back Tester . . . . . . . $7.95
31D3-D1 . . . .DB25 M/F Mini Tester . . . . . . . . . . $5.64
31D3-E1 . . . . DB25 M/F Serial Tester with LEDS . . . . $8.25
31D3-F1 . . . . DB25 M/F RS-232 Jumper Box Assembly . . $5.78
31D3-F2 . . . . DB25 M/F RS-232 Reverse Assembly. . . $5.78
31D3-G1 . . . .DB25 M/F with DB9 M Triport Adpater . . . . $5.64
LANID Pro Network Tester
LANID Pro is an essential tool for verifying and trouble-
shooting local area networks. It is designed for network
administrators to quickly diagnose problems during LAN
installation and repair. LANID Pro is equipped with
Portfi nder function, which helps easily locate the workstations
and corresponding ports on the switch/hub. It is great for the
wall plates that are labeled incorrectly.
260116 . . . . . . . . . . $155.00