Notebook PC User Guide
© Copyright 2009 Hewlett-Packard Development Company, L.P. ATI and ATI Mobility Radeon are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Using HP QuickWeb (select models only) Starting HP QuickWeb ......................................................................................................................... 2 Disabling and enabling HP QuickWeb ................................................................................................. 2 2 Features Identifying hardware ............................................................................................................................. 3 Components .
Roaming to another network .............................................................................................. 23 Using HP Mobile Broadband (select models only) ............................................................................. 24 Inserting a SIM ................................................................................................................... 25 Removing a SIM .............................................................................................................
Switching key functions on the embedded numeric keypad ............................. 44 Using an optional external numeric keypad ....................................................................... 44 Cleaning the TouchPad and keyboard ............................................................................................... 45 5 Multimedia Multimedia features ............................................................................................................................
7 HP Media Remote Control (Select Models Only) Component functions ......................................................................................................................... 70 Button quick reference ....................................................................................................................... 71 Inserting or replacing the battery ........................................................................................................ 75 Troubleshooting ...............
Conserving battery power .................................................................................................. 91 Storing a battery ................................................................................................................ 91 Disposing of a used battery ............................................................................................... 91 Replacing the battery ......................................................................................................
11 External media cards Using Digital Media Slot cards ......................................................................................................... 116 Inserting a digital card ...................................................................................................... 116 Removing a digital card ................................................................................................... 117 Using ExpressCards ....................................................................
Diagnostics menu ............................................................................................................ 138 Appendix B Software updates Updating the BIOS ........................................................................................................................... 140 Determining the BIOS version ......................................................................................... 140 Downloading a BIOS update ...........................................................
xii
1 Using HP QuickWeb (select models only) Your computer's main operating system is Windows®. Your computer may also feature HP QuickWeb (select models only). ● The Microsoft® Windows operating system displays the desktop on the display and controls your computer's hardware, peripherals, and software programs.
Starting HP QuickWeb To start HP QuickWeb: 1. Turn on your computer. The HP QuickWeb screen opens. 2. Click an icon on the HP QuickWeb screen to start a program. To start HP QuickWeb from Microsoft Windows: ▲ Select Start, click the arrow next to the Shut down button, and then click Restart. Your computer restarts and displays the HP QuickWeb home page. NOTE: To learn more about HP QuickWeb, refer to the HP QuickWeb software Help.
2 Features Identifying hardware To see a list of hardware installed in the computer, follow these steps: ▲ Select Start > Control Panel > System and Security. Then in the System area, click Device Manager. You can also add hardware or modify device configurations using Device Manager. NOTE: Windows® includes the User Account Control feature to improve the security of your computer.
Components Top components TouchPad Component Description (1) ● White: TouchPad is enabled. ● Amber: TouchPad is disabled. TouchPad light (2) TouchPad* Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button* Functions like the left button on an external mouse. (4) TouchPad on/off button Enables/disables the TouchPad. (5) TouchPad vertical scroll zone Scrolls up or down. (6) Right TouchPad button* Functions like the right button on an external mouse.
Lights Component Description (1) ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a low battery level or a critical battery level. ● Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged.
Component Description (8) On: The embedded numeric keypad is enabled. Num lock light – or – Num lock is enabled on a connected optional numeric keypad. (9) Wireless light ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. *The 2 power lights display the same information. The light on the power button is visible only when the computer is open.
Buttons, speakers, and fingerprint reader Component Description (1) Speakers (2) Produce sound. (2) Power button* ● When the computer is off, press the button to turn on the computer. ● When the computer is on, briefly press the button to initiate Sleep. ● When the computer is in the Sleep state, briefly press the button to exit Sleep. ● When the computer is in Hibernation, briefly press the button to exit Hibernation.
Component Description (5) Turns the wireless feature on or off but does not establish a wireless connection. Wireless button NOTE: A wireless network must be set up in order to establish a wireless connection. (6) Fingerprint reader (select models only) Allows a fingerprint logon to Windows, instead of a password logon. *This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help and Support.
Display Component Description (1) Internal display switch Turns off the display if the display is closed while the computer is turned on. (2) Internal digital dual-array microphones (2) Record sound. (3) Integrated webcam light On: The integrated webcam is in use. (4) Integrated webcam Records video and captures still photographs.
Front components Component Description (1) ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a low battery level or a critical battery level. ● Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged.
Right-side components Component Description (1) SmartBay Supports an optical drive or hard drive. (2) USB ports (2) Connect optional USB devices. (3) TV antenna/cable jack (select models only) Connects a TV antenna, a digital cable device, or a satellite device that receives standard or high-definition TV broadcasts. (4) RJ-11 (modem) jack (select models only) Connects a modem cable. (5) Power connector Connects an AC adapter.
Left-side components Component Description (1) Attaches an optional security cable to the computer. Security cable slot NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) External monitor port Connects an external VGA monitor or projector. (3) Expansion port 3 Connects the computer to an optional docking device or optional expansion product. NOTE: The computer has only one expansion port.
Bottom components Component Description (1) Holds the hard drive and the wireless LAN (WLAN) module. Hard drive bay CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
Wireless antennas Component Description (1) WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless wide-area networks (WWAN). (2) WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
Additional hardware components Component Description (1) Power cord* Connects an AC adapter to an AC outlet. (2) AC adapter Converts AC power to DC power. (3) Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by country or region.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. ● Service tag—Provides important information, including the following: ◦ Product name (1). This is the product name affixed to the front of your notebook. ◦ Serial number (s/n) (2). This is an alphanumeric identifier that is unique to each product. ◦ Part number/Product number (p/n) (3).
3 Wireless, local area network, and modem Using wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Identifying wireless and network status icons Icon Name Description Wireless (connected) Identifies the location of the wireless lights and the wireless buttons on the computer. Also identifies the HP Wireless Assistant software on the computer and indicates that one or more of the wireless devices are on. Wireless (disconnected) Identifies the HP Wireless Assistant software on the computer and indicates that all of the wireless devices are off.
Using the wireless button The computer has a wireless button, one or more wireless devices, and one or two wireless lights, depending on the model. All of the wireless devices on your computer are enabled at the factory, so the wireless light is on (blue) when you turn on the computer. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is blue, at least one wireless device is on.
Using HP Connection Manager (select models only) You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband device in your computer (select models only). To start Connection Manager, click the Connection Manager icon in the notification area, at the far right of the taskbar. – or – Select Start > All Programs > HP Connection Manager > HP Connection Manager. For more details about using Connection Manager, refer to the Connection Manager software Help.
Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions.
Protecting your WLAN Because the WLAN standard was designed with only limited security capabilities—basically to foil casual eavesdropping rather than more powerful forms of attack—it is essential to understand that WLANs are vulnerable to well-known and well-documented security weaknesses. WLANs in public areas, or “hotspots,” like coffee shops and airports may not provide any security.
Connecting to a WLAN To connect to the WLAN, follow these steps: 1. Be sure that the WLAN device is on. If it is on, the wireless light is on. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. Click the network icon in the notification area, at the far right of the taskbar. 3. Select your WLAN from the list. 4. Click Connect.
Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a mobile phone network operator. Coverage for HP Mobile Broadband is similar to mobile phone voice coverage.
Inserting a SIM CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM. To insert a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5.
Removing a SIM To remove a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery. 7.
Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following: ● Computers (desktop, notebook, PDA) ● Phones (cellular, cordless, smart phone) ● Imaging devices (printer, camera) ● Audio devices (headset, speakers) Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network (PAN) of Bluetooth devic
Troubleshooting wireless connection problems Some possible causes for wireless connection problems include the following: ● Network configuration (SSID or security) has been changed. ● Wireless device is not installed correctly or has been disabled. ● Wireless device or router hardware has failed. ● Wireless device encountered interference from other devices. NOTE: Wireless networking devices are included with select computer models only.
Cannot connect to a preferred network Windows can automatically repair a corrupted WLAN connection: ● If there is a network icon in the notification area, at the far right of the taskbar, right-click the icon, and then click Troubleshoot problems. Windows resets your network device and attempts to reconnect to one of the preferred networks. ● If there is no network icon in the notification area, follow these steps: 1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2.
If you are provided with new wireless network keys and SSID for a network, and if you have previously connected to that network, follow the steps below to connect to the network: 1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2. In the left panel, click Manage wireless networks. A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are active, several will be displayed. 3.
Using the modem (select models only) The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (included with select models only). In some countries, a country-specific modem cable adapter (included with select models only) is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem. WARNING! Connecting the internal analog modem to a digital line can permanently damage the modem.
Connecting a country-specific modem cable adapter Telephone jacks vary by country. To use the modem and the modem cable (included with select models only) outside the country in which you purchased the computer, you must obtain a country-specific modem cable adapter (included with select models only). To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, follow these steps: 1. Plug the modem cable into the modem jack (1) on the computer. 2.
Adding new locations when traveling By default, the only location setting available to the modem is a location setting for the country in which you purchased the computer. As you travel to different countries, set the internal modem to a location setting that meets the operating standards of the country in which you are using the modem. As you add new location settings, they are saved by the computer so that you can switch among settings at any time. You can add multiple location settings for any country.
Solving travel connection problems If you experience modem connection problems when using the computer outside of the country in which you purchased it, try the following suggestions. ● Check the telephone line type. The modem requires an analog, not a digital, telephone line. A line described as a PBX line is usually a digital line. A telephone line described as a data line, fax machine line, modem line, or standard telephone line is usually an analog line. ● Check for pulse or tone dialing.
7. Clear the check box for Wait for dial tone before dialing. 8. Click OK twice. Connecting to a local area network Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable: 1. Plug the network cable into the network jack (1) on the computer. 2.
4 Pointing devices and keyboard Using the TouchPad The following illustration and table describe the computer TouchPad. Component Description (1) ● White: TouchPad is enabled. ● Amber: TouchPad is disabled. TouchPad light (2) TouchPad* Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button* Functions like the left button on an external mouse. (4) TouchPad on/off button Enables/disables the TouchPad. (5) TouchPad scroll zone Scrolls up or down.
Setting TouchPad preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Devices and Printers. Then, right-click the device representing your computer, and select Mouse settings. Connecting an external mouse You can connect an external USB mouse to the computer using one of the USB ports on the computer.
Using keyboard hotkeys Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the function keys (3). The icons on the f1 through f12 keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections. Function Hotkey Display system information. fn+esc Open Help and Support. fn+f1 Open the Print Options window. fn+f2 Open a Web browser. fn+f3 Switch the screen image. fn+f4 Initiate Sleep. fn+f5 Initiate QuickLock.
Displaying system information Press fn+esc to display information about system hardware components and the system BIOS version number. In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS date is sometimes called the system ROM version number. Opening Help and Support Press fn+f1 to open Help and Support.
Opening the Print Options window Press fn+f2 to open the Print Options window of the active Windows application. Opening a Web browser Press fn+f3 to open your Web browser. Until you have set up your Internet or network services, the fn+f3 hotkey opens the Windows Internet Connection Wizard. After you have set up your Internet or network services and your Web browser home page, you can press fn+f3 to quickly access your home page and the Internet.
Initiating Sleep CAUTION: To reduce the risk of information loss, save your work before initiating Sleep. Press fn+f5 to initiate Sleep. When Sleep is initiated, your information is stored in system memory, the screen is cleared, and power is conserved. While the computer is in the Sleep state, the power lights blink. The computer must be on before you can initiate Sleep.
Playing, pausing or resuming an audio CD or a DVD The fn+f9 hotkey functions only when an audio CD or a DVD is inserted: ● If the audio CD or the DVD is not playing, press fn+f9 to begin or resume the play. ● If the audio CD or the DVD is playing, press fn+f9 to pause the play. Stopping an audio CD or a DVD Press fn+f10 to stop the play of an audio CD or a DVD.
Using keypads The computer has an embedded numeric keypad and also supports an optional external numeric keypad or an optional external keyboard that includes a numeric keypad. Component Description (1) fn key Enables/disables the embedded numeric keypad when pressed in combination with the num lk key. (2) Num lock light On: The embedded numeric keypad is enabled. – or – Num lock is enabled on a connected optional numeric keypad.
Using the embedded numeric keypad The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad. When the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by the icon in the upper-right corner of the key. Enabling and disabling the embedded numeric keypad Press fn+num lk to enable the embedded numeric keypad. The num lock light is turned on. Press fn +num lk again to return the keys to their standard keyboard functions.
Cleaning the TouchPad and keyboard Dirt and grease on the TouchPad can cause the pointer to jump around on the screen. To avoid this, clean the TouchPad with a damp cloth, and wash your hands frequently when using the computer. WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface.
5 Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures.
Identifying your multimedia components The following illustration and table describe the multimedia features of the computer. Component Description (1) Internal digital dual-array microphones (2) Record sound. (2) Webcam light Turns on when video software accesses the webcam. (3) Webcam Records video and captures still photographs. (4) Speakers (2) Produce sound.
Component Description (8) Volume mute button Mutes and restores speaker sound. (9) Volume scroll zone Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. You can also tap the minus sign on the scroll zone to decrease volume, or tap the plus sign on the scroll zone to increase volume. Using the MediaSmart button (select models only) The function of the MediaSmart button varies by model and installed software.
Adjusting the volume You can adjust the volume using the following controls: ● ● Computer volume buttons (select models only): ◦ To mute or restore volume, press the mute button (1). ◦ To decrease volume, slide your finger across the volume scroll zone from right to left, or press the volume down button (2). ◦ To increase volume, slide your finger across the volume scroll zone from left to right, press the volume up button (3). Windows® volume control: a.
Using the media activity hotkeys A media activity hotkey is a combination of the fn key (1) and a function key (2). 50 ● When an audio CD or a DVD is not playing, press fn+f9 (3) to play the disc. ● When an audio CD or a DVD is playing, use the following hotkeys: ◦ To pause or resume playing the disc, press fn+f9 (3). ◦ To stop the disc, press fn+f10 (4). ◦ To play the previous track of an audio CD or the previous chapter of a DVD, press fn+f11 (5).
Multimedia software Your computer includes preinstalled multimedia software that allows you to play music, watch movies, and view pictures. The following sections provide details about MediaSmart and other preinstalled multimedia software. Using HP MediaSmart software MediaSmart turns your computer into a mobile entertainment center. With MediaSmart, you can enjoy music and DVD movies. You can also play and sing along with karaoke CDs and view and record live TV (select models only).
Audio Your computer enables you to use a variety of audio features: ● Play music using your computer speakers and/or connected external speakers ● Record sound using the internal microphone or connect an external microphone ● Download music from the Internet ● Create multimedia presentations using audio and images ● Transmit sound and images with instant messaging programs ● Stream radio programs (select models only) or receive FM radio signals ● Create or “burn” audio CDs Connecting external
NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware and Sound > Sound.
Connecting an HDMI device The computer includes an HDMI (High Definition Multimedia Interface) port. The HDMI port connects the computer to an optional video or audio device, such as a high-definition television, or any compatible digital or audio component. The computer can support one HDMI device connected to the HDMI port, while simultaneously supporting an image on the computer display or any other supported external display.
Configuring audio for HDMI To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the HDMI port on your computer. Then configure the default audio playback device as follows: 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click either Digital Output or Digital Output Device (HDMI). 3. Click Set Default, and then click OK.
Watching TV (select models only) Your computer may have an integrated TV tuner (select models only), or you may have an optional external TV tuner, that enables you to watch, record, and pause live TV on the computer. In addition, if your computer includes an integrated TV tuner, then two remote controls are included in the box with the computer. ● HP Mobile Remote Control—Provides remote control of some features such as audio and video disc playback and can be stored in the ExpressCard slot.
3. Use the arrow keys to select the program you want to view, and then press the OK button. The recorded program begins to play in the preview window. 4. To watch in full-screen format, press the right arrow to move the cursor to the preview window and then press the OK button. NOTE: You can also use the keyboard to perform these steps. For more information on using MediaSmart to watch TV, refer to Help and Support.
Troubleshooting The following sections describe several common issues and resolutions. The optical disc tray does not open for removal of a CD, DVD, or BD 1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive. 2. Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it stops. 3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
The computer does not detect the optical drive If Windows does not detect an installed device, the device driver software may be missing or corrupted. If you suspect that the optical drive is not being detected, verify that the optical drive is listed in the Device Manager utility. 1. Remove any discs from the optical drive. 2. Click Start > Control Panel > System and Security. Then in the System area, click Device Manager. 3.
A disc does not play ● Save your work and close all open programs before playing a CD or a DVD. ● Log off the Internet before playing a CD or a DVD. ● Be sure that you insert the disc properly. ● Be sure that the disc is clean. If necessary, clean the disc with filtered water and a lint-free cloth. Wipe from the center of the disc to the outer edge. ● Check the disc for scratches. If you find scratches, treat the disc with an optical disc repair kit available at many electronics stores.
A DVD movie stops, skips, or plays erratically ● Clean the disc. ● Conserve system resources by trying the following suggestions: ◦ Log off the Internet. ◦ Change the color properties of the desktop: 1. Right-click on a blank area of the computer desktop, and select Screen resolution. 2. Select Advanced Settings > Monitor tab. 3. Select High Color (16 bit), if this setting is not already selected. 4. Click OK. ◦ Disconnect external devices, such as a printer, scanner, camera, or handheld device.
A DVD playing in Windows Media Player produces no sound or display Use DVD Play to play a DVD. DVD Play is installed on the computer, and is also available from the HP Web site at http://www.hp.com. A device driver must be reinstalled 1. Remove any discs from the optical drive. 2. Select Start > Control Panel > System and Security. Then in the System area, click Device Manager. 3.
Obtaining the latest HP device drivers 1. Open your Web browser, go to http://www.hp.com/support, and select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the search box, and then press enter. – or – If you want a specific SoftPaq, enter the SoftPaq number in the Search box, press enter, and follow the instructions provided. Proceed to step 6. 3. Click your specific product from the models listed. 4.
6 HP Mobile Remote Control (Select Models Only) Component functions NOTE: Your computer may include an updated remote control that functions differently than described in this guide. For the latest user guide for your remote control, go to the product support page for your computer at http://www.hp.com/support/. The infrared lens on the remote control links the remote control to the computer.
Button quick reference This section provides information on the button functions of the remote control. NOTE: The position of the buttons may vary, depending on your remote control model. Button Power Function ● When the computer is on, press the button to emulate the computer power button. Refer to the computer user guides for information. To access the user guides, select Start > Help and Support > User Guides. NOTE: DVD The remote control cannot be used when the computer is off.
Button Function Play/pause ● When media is not playing, press the button to play the selected media. ● When media is playing, press the button to pause the media. ● Press the button to fast-forward the selected media. Fast-forward NOTE: Channel/ page down 66 The button does not work with some media files. ● Press the fast-forward button and then press the play button to activate play. ● Press to emulate the pg dn key on a keyboard. ● Press to change channels in descending order.
Button Function Settings Press to display system information. The button may also be used to display settings menus for some multimedia software. Volume down Press the button to decrease speaker volume. Mute ● Press the button to mute speaker volume. ● If the volume is muted, press the button to restore speaker volume. Volume up Press the button to increase speaker volume.
Inserting or replacing the battery WARNING! Dispose of used batteries according to the instructions in the Regulatory, Safety and Environmental Notices located on a user guide disc or in Help and Support. To access the notices, select Start > Help and Support > User Guides. To insert or replace the battery in the remote control, follow these instructions: 68 1. On the back of the remote control, lift the battery compartment cover (1) and remove it (2). 2.
Troubleshooting Try the following solutions if your remote control does not function properly: ● Be sure that you have a clear line of sight from the remote control to the infrared port on the computer or optional docking device. ● Be sure that you are within range of the infrared port on the computer or optional docking device. ● Be sure that the battery is properly installed and has a charge. Replace the battery if necessary.
7 HP Media Remote Control (Select Models Only) Component functions NOTE: Your computer may include an updated remote control that functions differently than described in this guide. For the latest user guide for your remote control, go to the product support page for your computer at http://www.hp.com/support/. The infrared lens on the remote control links the remote control to the computer.
Button quick reference This section provides information on the functions of the remote control buttons. NOTE: The position of the buttons may vary, depending on your remote control model. Button Function Power ● When the computer is on, press the button to emulate the computer power button. Refer to the computer user guides for information. To access the user guides, select Start > Help and Support > User Guides. NOTE: The remote control cannot be used when the computer is off.
Button Function Previous Press the button to jump from one area, menu, or button to the previous one. Play/pause ● When media is not playing, press the button to play the selected media. ● When media is playing, press the button to pause the media. ● Press the button to rewind the selected media. Rewind NOTE: ● Keypad The button does not work with some media files. Press the rewind button and then press the play button to activate play.
Button Function DVD NOTE: The DVD button is included on select remote controls only. ● If a DVD is playing, press the button to open the DVD disc menu. ● If a DVD is not playing, press the button to open the default DVD player. NOTE: If the computer has been set up to require a logon password, you may be asked to log on to Windows. Teletext NOTE: The Teletext button is included on select remote controls only. Enables Teletext, when available, during Live TV.
Button Function Fast-forward ● Press the button to fast- forward the selected media. NOTE: ● Enter 74 The button does not work with some media files. Press the fast-forward button and then press the play button to activate play. Press the button to enter or select the desired action, menu, or window option.
Inserting or replacing the battery WARNING! Dispose of used batteries according to the instructions in the Regulatory, Safety and Environmental Notices located in Help and Support. To access the notices, select Start > Help and Support > User Guides. To insert or replace the battery in the remote control, follow these instructions: 1. On the back of the remote control, slide the battery compartment cover in the direction of the arrow (1), and then lift the cover to remove it (2). 2.
3. Align the battery compartment cover with the battery compartment (2), and then slide the cover to close it (3). Troubleshooting Try the following solutions if your remote control does not function properly: 76 ● Be sure that you have a clear line of sight from the remote control to the infrared port on the computer or optional docking device. ● Be sure that you are within range of the infrared port on the computer or optional docking device.
8 Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
● Press a key on the keyboard or button on the remote control. ● Activate the TouchPad. When the computer exits Sleep, the power lights turn on and your work returns to the screen where you stopped working. NOTE: If you have set a password to be required on wakeup, you must enter your Windows password before your work will return to the screen.
Using power plans A power plan is a collection of system settings that manages how the computer uses power. Power plans can help you conserve power or maximize performance. You can change power plan settings or create your own power plan. Viewing the current power plan ▲ Click the battery meter icon in the notification area, at the far right of the taskbar. – or – Select Start > Control Panel > System and Security > Power Options.
Switching between graphics modes (select models only) Your computer is equipped with ATI™ Switchable Graphics technology and has two modes for processing graphics. When you switch from AC power to battery power, the computer can conserve battery power by switching from ATI Mobility Radeon™ Premium graphics to Intel® integrated graphics. Similarly, when you switch from battery power to AC power, the computer can switch back to the highperformance graphics mode.
Using external AC power External AC power is supplied through one of the following devices: WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet.
Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power: ● The computer will not turn on. ● The display does not turn on. ● The power light is off. To test the AC adapter: 1. Remove the battery from the computer. a. Turn the computer upside down on a flat surface. b. Slide the battery release latch (1) to release the battery. c. Pivot the battery (2) upward and remove the battery from the computer (3). 2.
Using battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is plugged into external AC power, the computer runs on AC power. If the computer contains a charged battery and is running on external AC power supplied through the AC adapter, the computer switches to battery power if the AC adapter is disconnected from the computer.
Displaying the remaining battery charge ▲ Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. Inserting or removing the battery CAUTION: Removing a battery that is the sole power source can cause loss of information. To prevent loss of information, initiate Hibernation or shut down the computer through Windows before removing the battery. To insert the battery: 1. Turn the computer upside down on a flat surface. 2.
3. Pivot the battery (2) upward and remove the battery from the computer (3). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
Maximizing battery discharge time Battery discharge time varies depending on the features you use while on battery power. Maximum discharge time gradually shortens, as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time: ● Lower the brightness on the display. ● Check the Power saver setting in Power Options. ● Remove the battery from the computer when it is not being used or charged. ● Store the battery in a cool, dry location.
Resolving a low battery level CAUTION: To reduce the risk of losing information when the computer reaches a critical battery level and has initiated Hibernation, do not restore power until the power lights turn off. Resolving a low battery level when external power is available ▲ Connect one of the following devices: ● AC adapter ● Optional expansion product or docking device ● Optional power adapter Resolving a low battery level when a charged battery is available 1.
Calibrating a battery Calibrate a battery under the following conditions: ● When battery charge displays seem inaccurate ● When you observe a significant change in battery run time Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also not necessary to calibrate a new battery. Step 1: Fully charge the battery WARNING! Do not charge the computer battery while you are onboard aircraft.
Step 3: Discharge the battery The computer must remain on while the battery is being discharged. The battery can discharge whether or not you are using the computer, but the battery will discharge faster while you are using it. ● If you plan to leave the computer unattended during the discharge, save your information before beginning the discharge procedure.
7. Click OK. 8. Click Save changes. Conserving battery power ● Select Start > Control Panel > System and Security > Power Options > Power saver. ● Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. ● Disconnect external devices that are not plugged into an external power source, when you are not using them. ● Stop, disable, or remove any external media cards that you are not using.
Shutting down the computer CAUTION: Unsaved information will be lost when the computer is shut down. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer.
9 Drives Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply.
Optical drive Your computer includes an optical drive that expands the functionality of the computer. Identify what kind of device is installed in your computer to see its capabilities. The optical drive allows you to read data discs, play music, and watch movies. If your computer includes a Blu-ray Disc ROM Drive, then you can also watch high-definition video from disc. Identifying the installed optical drive ▲ Select Start > Computer.
Using optical discs An optical drive supports optical discs. Your optical drive can read standard CD and DVD discs, and if it is a Blu-ray Disc ROM Drive, it can also read Blu-ray Discs (BDs). These discs store information, such as music, photos, and movies. DVDs have a larger storage capacity than CDs, and BDs have the largest capacity of all. NOTE: Some of the optical drives listed may not be supported by your computer. The listed drives are not necessarily all of the supported optical drives.
Selecting the right disc An optical drive supports optical discs (CDs, DVDs, and BDs). CDs, used to store digital data, are also used for commercial audio recordings and are convenient for your personal storage needs. DVDs and BDs are used primarily for movies, software, and data backup purposes. DVDs and BDs are the same form factor as CDs, but DVDs have 6 to 7 times the storage capacity of CDs, and BDs have 5 to 6 times the storage capacity of DVDs.
LightScribe DVD+R discs Use LightScribe DVD+R discs for sharing and storing data, home videos, and photos. These discs are read-compatible with most DVD-ROM drives and DVD video players. With a LightScribe-enabled drive and LightScribe software, you can write data to the disc and then add a designer label to the outside of the disc. Blu-ray Disc Also called BD, Blu-ray Disc is a high-density optical disc format for the storage of digital information, including high-definition video.
Configuring AutoPlay 1. Select Start > Default Programs > Change AutoPlay settings. 2. Confirm that the Use AutoPlay for all media and devices check box at the upper left of the computer screen is selected. 3. Click Choose a default, and then select one of the available options for each media type listed. 4. Click Save. NOTE: For more information about AutoPlay, refer to Help and Support. Changing DVD region settings Most DVDs that contain copyrighted files also contain region codes.
Observing the copyright warning It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyrightprotected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes. CAUTION: To prevent loss of information or damage to a disc, observe the following guidelines: Before writing to a disc, connect the computer to a reliable external power source.
Creating (burning) a CD or DVD If your computer includes a CD-RW, DVD-RW, or DVD±RW optical drive, you can use software such as Windows Media Player or CyberLink Power2Go to burn data and audio files, including MP3 and WAV music files. To burn video files to a CD or DVD, use MyDVD. Observe the following guidelines when burning a CD or DVD: ● Before burning a disc, save and close any open files and close all programs.
Removing an optical disc (CD, DVD, or BD) 1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: 3. If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
Using external drives Removable external drives expand your options for storing and accessing information. A USB drive can be added by connecting the drive to a USB port on the computer or on an optional docking device or optional expansion product. USB drives include the following types: ● 1.
Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system can run more efficiently. After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour to complete.
Using HP ProtectSmart Hard Drive Protection (select models only) HP ProtectSmart Hard Drive Protection protects the hard drive by parking the drive and halting I/O requests under either of the following conditions: ● You drop the computer. ● You move the computer with the display closed while the computer is running on battery power. A short time after the end of one of these events, HP ProtectSmart Hard Drive Protection returns the hard drive to normal operation.
Using HP ProtectSmart Hard Drive Protection software The HP ProtectSmart Hard Drive Protection software enables you to perform the following tasks: ● Enable and disable HP ProtectSmart Hard Drive Protection. NOTE: Depending on your user privileges, you may not be able to enable or disable HP ProtectSmart Hard Drive Protection. Additionally, members of an Administrator group can change the privileges for non-Administrator users. ● Determine whether a drive in the system is supported.
Replacing the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. To remove the hard drive: 1. Save your work. 2.
9. Remove the 3 hard drive screws. 10. Pull the hard drive tab to the left (1), and then lift the hard drive away from the computer (2). To install a hard drive: 1. Insert the hard drive into the hard drive bay (1).
2. Slide the hard drive to the right until it snaps into place (2). 3. Replace the 3 hard drive screws. 4. Align the tabs (1) on the hard drive cover with the notches on the computer. 5. Close the cover (2).
6. Tighten the hard drive cover screws (3).
Replacing a drive in the SmartBay The SmartBay can hold either an optical drive or a hard drive. CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the drive from the SmartBay. Do not remove the drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.
8. Remove the drive from the SmartBay. To insert a drive in the SmartBay: ▲ Insert the drive into the SmartBay and push in until it snaps into place.
10 External devices Using a USB device A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional expansion product. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices.
Removing a USB device CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove a USB device. CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To remove a USB device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
Using an eSATA device An eSATA port connects an optional high-performance eSATA component, such as an eSATA external hard drive. Some eSATA devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. NOTE: The eSATA port also supports an optional USB device.
Removing an eSATA device CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove an eSATA device. CAUTION: device. To prevent damage to an eSATA connector, do not pull on the cable to remove the eSATA To remove an eSATA device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
11 External media cards Using Digital Media Slot cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers.
Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card. Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To remove a digital card: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
Using ExpressCards An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device. If you are instructed by the ExpressCard manufacturer to install device drivers: ● Install only the device drivers for your operating system.
2. Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of options may be displayed. NOTE: The first time you insert an ExpressCard, the "Installing device driver software" message is displayed in the notification area, at the far right of the taskbar. NOTE: An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an ExpressCard when it is not in use.
Removing an ExpressCard CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the ExpressCard. Save your information and close all programs associated with the ExpressCard. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To remove an ExpressCard: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
12 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. b.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c.
15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer.
13 Security Protecting the computer Standard security features provided by the Windows® operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks.
Using passwords A password is a group of characters that you choose to secure your computer information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in the non-Windows Setup Utility preinstalled on the computer. CAUTION: To prevent being locked out of the computer, record each password you set.
Setting passwords in Setup Utility Password Function Administrator password* ● Protects access to Setup Utility. ● After this password is set, it must be entered each time you access Setup Utility. CAUTION: If you forget your administrator password, you cannot access Setup Utility. Power-on password* ● Protects access to the computer contents. ● After this password is set, it must be entered each time you turn on or restart the computer, or exit Hibernation.
Your changes go into effect when the computer restarts. Entering an administrator password At the Enter Password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again. Power-on password Your power-on password prevents unauthorized use of the computer. After this password is set, it must be entered each time you turn on or restart the computer, or exit Hibernation.
Using antivirus software When you use the computer to access e-mail, a network, or the Internet, you expose it to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date.
Installing critical security updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the computer was shipped.
Using the fingerprint reader (select models only) NOTE: The location of the fingerprint reader varies by computer model.
Registering fingerprints A fingerprint reader allows you to log on to Windows using a fingerprint that you have registered using DigitalPersona Personal software, instead of using a Windows password. To register one or more fingerprints, follow these steps: 1. In Windows, click the DigitalPersona Personal icon in the notification area, at the far right of the taskbar. 2. Read the welcome text, and then click Next. The “Verify Your Identity” page opens. 3.
Using your registered fingerprint to log on to Windows To log on to Windows using your fingerprint, follow these steps: 1. Immediately after you have registered your fingerprints, restart Windows. 2. Swipe any of your registered fingers to log on to Windows.
A Setup Utility (BIOS) Starting Setup Utility Setup Utility is a ROM-based information and customization utility that can be used even when your Windows® operating system is not working. NOTE: The fingerprint reader (select models only) cannot be used to access Setup Utility. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start Setup Utility: ▲ Open Setup Utility by turning on or restarting the computer.
Using Setup Utility Changing the language of Setup Utility The following procedure explains how to change the language of Setup Utility. If Setup Utility is not already running, begin at step 1. If Setup Utility is already running, begin at step 2. 1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower left corner of the screen, press f10. – or – Open Setup Utility by turning on or restarting the computer.
Displaying system information You can use Setup Utility to view such information as the system time and date and information that identifies the computer. The following procedure explains how to do this. If Setup Utility is not open, begin at step 1. If Setup Utility is open, begin at step 2. 1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower left corner of the screen, press f10.
Exiting Setup Utility You can exit Setup Utility with or without saving changes. ● To exit Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter. ● To exit Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display.
System Configuration menu Select To do this Language Support Change the language of Setup Utility. Button Sound (select models only) Enable/disable the capacitive button tapping sound. Virtualization Technology (select models only) Enable/disable the processor Virtualization Technology. Processor C6 State (select models only) Enable/disable the processor C6 sleep state. LAN Power Saving (select models only) Enable/disable LAN Power Saving.
B Software updates Updated versions of the software provided with your computer may be available on the HP Web site. Most software and BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. To update the software, follow these steps, which are explained in the remainder of this guide: 1.
Updating the BIOS To update the BIOS, first determine what BIOS version you currently have and then download and install the new BIOS. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed.
Downloading a BIOS update CAUTION: To prevent damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source.
Updating programs and drivers To download and install software other than a BIOS update, follow these steps: To use the HP Web site: 1. Open your Web browser, go to http://www.hp.com/support, and select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the Search box, and then press enter. – or – If you want a specific SoftPaq, enter the SoftPaq number in the Search box, press enter, and follow the instructions provided. Proceed to step 6.
C Backup and recovery Recovery after a system failure is as complete as your most current backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
Creating recovery discs HP recommends that you create recovery discs to be sure that you can restore your system to its original factory state if you experience serious system failure or instability. Create these discs after setting up the computer for the first time. Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of recovery discs.
Backing up your information As you add new software and data files, you should back up your system on a regular basis to maintain a reasonably current backup. Back up your system at the following times: ● At regularly scheduled times NOTE: Set reminders to back up your information periodically.
Using Windows Backup and Restore To create a backup using Windows Backup and Restore, follow these steps: NOTE: Be sure that the computer is connected to AC power before you start the backup process. NOTE: The backup process may take over an hour, depending on file size and the speed of the computer. 1. Select Start > All Programs > Maintenance > Backup and Restore. 2. Follow the on-screen instructions to set up and create a backup.
Using system restore points When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.
Performing a recovery NOTE: You can recover only files that you have previously backed up. HP recommends that you use HP Recovery Manager to create a set of recovery discs (entire drive backup) as soon as you set up your computer. Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models only) on the hard drive.
Index Symbols/Numerics 1394 Power Saving 138 A AC adapter connecting 82 identifying 15 testing 83 administrator password creating 127 entering 128 managing 127 airport security devices 93 antennas 14 antivirus software 129 applications key, Windows 8 arrow buttons 71 audio devices, connecting external 52 audio features 52 audio functions, checking 52 audio-in (microphone) jack, identifying 10, 47 audio-out (headphone) jacks, identifying 10, 47 AutoPlay 98 B back button 66, 71 backing up customized window,
calibrating battery 89 caps lock light, identifying 5 Card Reader Power Saving 138 CD copying 99 playing 97 removing 101 CD drive 95, 102 Certificate of Authenticity label 16 change/page up button 73 changing the language of Setup Utility 135 channel/page down button 66, 73 channel/page up button 65 charging batteries 86, 89 checking audio functions 52 clear button 72 compartments memory module 13 Mini Card 13 components additional hardware 15 bottom 13 front 10 left-side 12 rear 10 right-side 11 top 4 comp
initiated during critical battery level 87 initiating 78 high-definition devices, connecting 54 hotkeys audio CD or DVD controls 42 decreasing screen brightness 41 description 38 displaying system information 39 increasing screen brightness 41 initiating QuickLock 41 initiating Sleep 41 opening Help and Support 39 opening Print Options window 40 opening Web browser 40 switching screen image 40 using 38 HP Connection Manager software 20 HP Mobile Broadband Module 24, 25 HP ProtectSmart Hard Drive Protection
modem approval label 16 modem cable connecting 31 country-specific cable adapter 32 noise suppression circuitry 31 modem software setting/adding location 32 travel connection problems 34 monitor port, external 12 monitor, connecting 53 mouse, external connecting 37 setting preferences 37 multimedia components, identifying 47 multimedia software 51 mute button 67, 71 mute button, identifying 7, 48, 49 N navigating in Setup Utility 135 network cable connecting 35 noise suppression circuitry 35 network icons 1
SIM slot, identifying 13 Sleep exiting 77 initiating 77 Sleep hotkey 41 slots Digital Media 12 ExpressCard 12 memory module 13 security cable 12 SIM 13 SmartBay identifying 11 inserting a drive 110 replacing a drive 110 SmartBay release latch, identifying 13 snapshot button 72 software antivirus 129 critical updates 130 Disk Cleanup 103 Disk Defragmenter 103 firewall 129 HP Connection Manager 20 MediaSmart 51 multimedia 51 Windows Media Player 51 Wireless Assistant 19 WWAN 20 solid-state drive (SSD) 143, 14
WLAN module 13 writable media 77 WWAN module 13, 24 WWAN software 20 Z zoom button 154 Index 72
