HP Pavilion Notebook PC User Guide
© Copyright 2010 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Features ........................................................................................................................................................... 1 Identifying the hardware ....................................................................................................................... 1 Top components .................................................................................................................. 1 TouchPad .....................................
WLAN connection is very weak ......................................................................................... 22 Cannot connect to the wireless router ............................................................................... 22 Connecting to a local area network (LAN) .......................................................................................... 22 3 Pointing devices and keyboard ......................................................................................................
CD-RW discs ..................................................................................................... 40 DVD±R discs ..................................................................................................... 40 DVD±RW discs ................................................................................................. 40 LightScribe DVD+R discs .................................................................................. 40 Blu-ray Discs (BDs) ..................................
Finding battery information in Help and Support ............................................................... 55 Using Battery Check .......................................................................................................... 55 Displaying the remaining battery charge ........................................................................... 55 Inserting or removing the battery ....................................................................................... 55 Charging a battery ....
Using an eSATA device ..................................................................................................................... 72 Connecting an eSATA device ............................................................................................ 72 Removing an eSATA device .............................................................................................. 72 8 External media cards ....................................................................................................
Displaying system information ........................................................................................... 93 Restoring default settings in Setup Utility .......................................................................... 93 Exiting Setup Utility ............................................................................................................ 94 Setup Utility menus ...............................................................................................................
1 Features Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. To see a list of hardware installed in the computer: 1. Select Start > Control Panel > System and Security. 2. In the System area, click Device Manager. You can also add hardware or modify device configurations using Device Manager.
Lights Component (1) Description Power light ● White: Power is on. ● Blinking White: The computer is in the Sleep state. NOTE: Another power light is located on the left side of the computer. (2) Mute light Amber: Speaker sound is off. (3) Wireless light ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. NOTE: ● 2 Wireless devices are enabled at the factory. Amber: All wireless devices are off.
Power button and fingerprint reader Component Description (1) ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep. ● When the computer is in Hibernation, press the button briefly to exit Hibernation.
Keys 4 Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Displays system information when pressed in combination with the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the pointer. (5) Action keys Execute frequently used functions.
Front components Component Description (1) Supports the following optional digital card formats: (2) Digital Media Slot Speakers (2) ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card ● Secure Digital High Capacity (SDHC) Memory Card (standard and large size) ● xD-Picture Card (XD) Produce sound. Right-side components Component (1) Description Optical drive light ● On: The optical drive is being accessed.
Left-side components Component (1) Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) External monitor port Connects an optional external display, such as a monitor or projector, to the computer. (3) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.
Component Description (10) HDMI port Connects an optional HDMI device. (11) Combo eSATA/USB port Connects an optional USB device or highperformance eSATA component, such as an eSATA external hard drive. Display components Component Description (1) Internal display switch Turns off the display if the display is closed while the power is on. (2) Webcam light White: The webcam is in use. (3) Webcam Records video and captures still photographs. (4) Internal microphone Records sound.
Bottom components Component Description (1) Battery bay Holds the battery. (2) Battery release latch Releases the battery from the battery bay. (3) Vents (6) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (4) Hard drive bay Holds the hard drive.
Component Description (1) WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). (2) WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wireless wide-area networks (WWANs). *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
Additional hardware components Component Description (1) Power cord* Connects an AC adapter to an AC outlet. (2) AC adapter Converts AC power to DC power. (3) Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by region and country. Labels The labels affixed to the computer provide information needed when troubleshooting system problems or traveling internationally with the computer.
Item Component Description (2) Serial number This is an alphanumeric identifier that is unique to each product. (3) Product number This is an alphanumeric identifier that provides specific information about the hardware components. The product number helps a service technician to determine what components and parts are needed. (4) Warranty period The duration (in years) of the warranty period for this computer.
2 Networking Using wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Icon Name Description Wired network (connected) Indicates that one or more of your network drivers are installed and one or more network devices are connected to the network. Wired network (disabled/disconnected) Indicates that one or more of your network drivers are installed, all network devices or all wireless devices are disabled in Windows Control Panel, and no network devices are connected to a wired network.
To view the state of the wireless devices, click the Show hidden icons icon, the arrow at the left of the notification area, and position the mouse pointer over the wireless icon. If the wireless icon is not displayed in the notification area, complete the following steps to change Wireless Assistant properties: 1. Select Start > Control Panel > Hardware and Sound > Windows Mobility Center. 2.
Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● The wireless computer (3) The following illustration shows an example of a wireless network installation that is connected to the Internet.
A variety of sophisticated encryption protocols is available for your WLAN. Find the solution that works best for your network security: ◦ Wired Equivalent Privacy (WEP) is a wireless security protocol that encodes or encrypts all network data before it is transmitted using a WEP key. Usually, you can allow the network to assign the WEP key. Alternatively, you can set up your own key, generate a different key, or choose other advanced options.
Roaming to another network When you move your computer within range of another WLAN, Windows attempts to connect to that network. If the attempt is successful, your computer is automatically connected to the new network. If Windows does not recognize the new network, follow the same procedure you used initially to connect to your WLAN.
6. Remove the battery. 7. Insert the SIM card into the slot. 8. Replace the battery. NOTE: HP Mobile Broadband will be disabled if the battery is not replaced. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer. Removing a SIM To remove a SIM: 18 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
7. Push in on the SIM card (1) to release it, and then remove the SIM card (2). 8. Replace the battery. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer.
Troubleshooting wireless connection problems Some possible causes for wireless connection problems include the following: ● Network configuration (SSID or security) has been changed. ● Wireless device is not installed correctly or has been disabled. ● Wireless device or router hardware has failed. ● Wireless device encountered interference from other devices. NOTE: Wireless networking devices are included with select computer models only.
Network icon is not displayed If the network status icon is not displayed in the notification area after you configure the WLAN, the software driver is either missing or corrupted. A Windows “Device not Found” error message may also be displayed. The driver must be reinstalled. Get the latest version of the WLAN device software and drivers for your computer from the HP Web site at http://www.hp.com.
WLAN connection is very weak If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize interference from other devices, as follows: ● Move your computer closer to the wireless router or access point. ● Temporarily disconnect devices such as a microwave, cordless phone, or cellular phone to be sure that other wireless devices are not interfering. If the connection does not improve, try forcing the device to reestablish all connection values: 1.
2. Plug the other end of the cable into a network wall jack (2).
3 Pointing devices and keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Control Panel > Hardware and Sound > Mouse. Using the TouchPad Turning the TouchPad on and off The TouchPad is turned on at the factory. To turn the TouchPad off or on, quickly double-tap the TouchPad on/off button.
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.
Using TouchPad gestures The TouchPad supports a variety of TouchPad gestures. To activate the TouchPad gestures, place two fingers on the TouchPad at the same time as described in the following sections. The TouchPad gestures described in this section are enabled at the factory. To disable or reenable these gestures: 1. Double-click on the Synaptics icon in the notification area, at the far right of the taskbar, and then click the Device Settings tab. 2. Select the device, and then click Settings. 3.
Connecting an external mouse You can connect an external USB mouse to the computer using one of the USB ports on the computer. A USB mouse can also be connected to the system using the ports on an optional docking device or expansion product. Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. To use an action key, press and hold this key to activate the assigned action.
Icon Action Description Screen brightness up Increases the screen brightness level incrementally when you hold down this key. Switch screen image Switches the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor.
Icon Function Hotkey Description Display system information fn+esc Displays information about system hardware components and the system BIOS version number. Scroll up fn+up arrow Scrolls the page up. Scroll down fn+down arrow Scrolls the page down. Go home fn+left arrow Returns the cursor to the beginning of the line where the cursor is located or returns to the beginning of the document.
30 Chapter 3 Pointing devices and keyboard
4 Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures.
Component Description (1) Webcam light Turns on when video software accesses the webcam. (2) Webcam Records video and captures still photographs. (3) Internal microphone Records sound. (4) Decrease volume action key To decrease the volume, press the f9 action key. (5) Increase volume action key To increase the volume, press the f10 action key. (6) Mute/restore volume action key To mute or restore the volume, press the f11 action key. (7) Speakers (2) Produce sound.
Using the media activity functions The media activity action keys control the play of an audio CD, a DVD, or a BD that is inserted into the optical drive. Using the media activity action keys Media activity is controlled by the f5, f6, f7, and f8 action keys. ● When an audio CD, a DVD, or a BD is not playing, press the f6 action key (2) to play the disc. ● When an audio CD, a DVD, or a BD is playing, use the following action keys: ◦ To pause or resume playing the disc, press the f6 action key (2).
CAUTION: To prevent loss of information or damage to a disc, observe the following guidelines: Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power. Before writing to a disc, close all open programs except the disc software you are using. Do not copy directly from a source disc to a destination disc or from a network drive to a destination disc.
Installing multimedia software from a disc 1. Insert the disc into the optical drive. 2. When the installation wizard opens, follow the on-screen instructions. 3. Restart the computer if prompted to do so.
To check the record functions of the computer, follow these steps: 1. Select Start > All Programs > Accessories > Sound Recorder. 2. Click Start Recording and speak into the microphone. Save the file to your desktop. 3. Open Windows Media Player or MediaSmart and play back the sound. NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise.
▲ To connect a display device, connect the device cable to the external monitor port. NOTE: If a properly connected external display device does not display an image, press f4 to transfer the image to the device. Repeatedly pressing f4 alternates the screen image between the computer display and the device. Connecting an HDMI device The computer includes an HDMI (High Definition Multimedia Interface) port.
To connect a video or audio device to the HDMI port: 1. Connect one end of the HDMI cable to the HDMI port on the computer. 2. Connect the other end of the cable to the video device, according to the device manufacturer’s instructions. 3. Press the f4 action key on the computer to switch the image between the display devices connected to the computer.
Using optical discs (CDs, DVDs, and BDs) An optical drive, such as a DVD-ROM drive, supports optical discs (CDs and DVDs). These discs store information, such as music, photos, and movies. DVDs have a higher storage capacity than CDs. Your optical drive can read standard CD and DVD discs. If your optical drive is a Blu-ray Disc (BD) drive, it can also read BDs. NOTE: Some of the optical drives listed may not be supported by your computer.
● Keeping permanent archives of computer files and scanned home records ● Offloading files from your hard drive to free up disk space After data is recorded, it cannot be erased or written over. CD-RW discs Use a CD-RW disc (a rewritable version of a CD) to store large projects that must be updated frequently.
3. Pull out the tray (2). 4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up over the tray spindle. NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle. 5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place. 6. Close the disc tray. If you have not yet configured AutoPlay, as described in the following section, an AutoPlay dialog box opens.
To change settings through the operating system: 1. Select Start > Computer > System properties. 2. In the left pane, click Device Manager. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Windows Help and Support for more information. 3.
● DVD players used in home systems usually do not support all DVD formats. Refer to the user guide that came with your DVD player for a list of supported formats. ● An MP3 file uses less space than other music file formats, and the process for creating an MP3 disc is the same as the process for creating a data file. MP3 files can be played only on MP3 players or on computers with MP3 software installed. To burn a CD, DVD, or BD, follow these steps: 1.
Troubleshooting The following sections describe several common issues and resolutions. The optical disc tray does not open for removal of a CD, DVD, or BD 1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive. 2. Press in gently on the paper clip until the disc tray is released, and then pull out the tray (2) until it stops. 3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
● Scan for hardware changes. Windows scans your system for installed hardware and installs any required drivers. ● Click Properties to see if the device is working properly: ◦ The Properties window provides details about the device to help you troubleshoot issues. ◦ Click the Driver tab to update, disable, or uninstall drivers for this device.
– or – ◦ ● The playback window in the multimedia program may close. To return to playing the disc, click the Play button in your multimedia program to restart the disc. In rare cases, you may need to exit the program, and then restart it. Increase system resources: ◦ Turn off printers and scanners, and unplug cameras and portable handheld devices. Disconnecting these Plug and Play devices frees up valuable system resources and results in better playback performance. ◦ Change desktop color properties.
A movie is not visible on an external display 1. If both the computer display and an external display are turned on, press the f4 action key one or more times to switch between the two displays. 2. Configure the monitor settings to make the external display primary: a. Right-click on a blank area of the computer desktop, and select Screen resolution. b. Specify a primary display and a secondary display.
Obtaining the latest HP device drivers 1. Open your Web browser, go to http://www.hp.com/support, and select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the product box, and then press enter. 3. Click your specific product from the models listed. 4. Click the Windows 7 operating system. 5. When the list of drivers is displayed, click an updated driver to open a window containing additional information. 6.
Adjusting webcam properties You can adjust webcam properties using the Properties dialog box, which is accessible from various programs that use the integrated camera, usually from a configuration, settings, or properties menu: ● Brightness—Controls the amount of light that is incorporated into the image. A higher brightness setting creates a brighter image; a lower brightness setting creates a darker image. ● Contrast—Controls the difference between lighter and darker areas on the image.
5 Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
Initiating and exiting Hibernation The system is set at the factory to initiate Hibernation after 1,080 minutes (18 hours) of inactivity when running on either battery power or external power, or when the battery reaches a critical battery level. Power settings and timeouts can be changed using Power Options in Windows Control Panel. To initiate Hibernation: ▲ Click Start, click the arrow next to the Shut down button, and then click Hibernate. To exit Hibernation: ▲ Briefly press the power button.
Selecting a different power plan ▲ Click the battery meter icon in the notification area, and then select a power plan from the list. – or – Select Start > Control Panel > System and Security > Power Options, and then select a power plan from the list. Customizing power plans 1. Click the battery meter icon in the notification area, and then click More power options. – or – Select Start > Control Panel > System and Security > Power Options. 2. Select a power plan, and then click Change plan settings.
WARNING! Do not charge the computer battery while you are onboard aircraft. ● When you are charging or calibrating a battery ● When you are installing or modifying system software ● When you are writing information to a CD, DVD, or BD When you connect the computer to external AC power, the following events occur: ● The battery begins to charge. ● If the computer is turned on, the battery meter icon in the notification area changes appearance.
Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power: ● The computer will not turn on. ● The display does not turn on. ● The power lights are off. To test the AC adapter: 1. Remove the battery from the computer. 2. Connect the AC adapter to the computer, and then plug it into an AC outlet. 3. Turn on the computer. If the power lights turn on, the AC adapter is working properly.
Finding battery information in Help and Support Help and Support provides the following tools and information about the battery: ● Battery Check tool to test battery performance ● Information on calibration, power management, and proper care and storage to maximize battery life ● Information on battery types, specifications, life cycles, and capacity To access battery information: ▲ Select Start > Help and Support > Learn > Power Plans: Frequently Asked Questions.
3. Rotate the battery into the battery bay until it is seated (2). The battery release latch automatically locks the battery into place (3). To remove the battery: 1. Turn the computer upside down on a flat surface. 2. Slide the battery release latch (1) to release the battery. NOTE: The battery release latch automatically returns to its original position. 3. 56 Pivot the battery (2) upward and remove it from the computer (3).
Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
Identifying low battery levels When a battery that is the sole power source for the computer reaches a low battery level, the battery light blinks. If a low battery level is not resolved, the computer enters a critical battery level, and the battery light continues to blink. The computer takes the following actions for a critical battery level: ● If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation.
Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also not necessary to calibrate a new battery. Step 1: Fully charge the battery WARNING! Do not charge the computer battery while you are onboard aircraft. NOTE: The battery charges whether the computer is off or in use, but it charges faster when the computer is off. To fully charge the battery: 1. Insert the battery into the computer. 2.
Step 3: Discharge the battery The computer must remain on while the battery is being discharged. The battery can discharge whether or not you are using the computer, but the battery will discharge faster while you are using it. ● If you plan to leave the computer unattended during the discharge, save your information before beginning the discharge procedure.
Conserving battery power ● Select the Power saver power plan through Power Options under System and Security in Windows Control Panel. ● Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. ● Disconnect external devices that are not plugged into an external power source, when you are not using them. ● Stop, disable, or remove any external media cards that you are not using.
mode to power-saving mode to conserve battery life. Similarly, when switching from battery power to AC power, the computer switches back to the high-performance mode. NOTE: In order to optimize computer performance, the system might not allow switching modes, or prompt you to switch modes. It might be necessary to close all programs before switching. NOTE: mode. HDMI only works in the high-performance mode.
6 Drives Identifying installed drives Your computer includes a solid state drive (SSD) with solid-state memory. Because it has no moving parts, an SSD does not generate as much heat as other hard drives. To view the drives installed on the computer, select Start > Computer. Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply.
Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system can run more efficiently. After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour to complete.
Identifying HP ProtectSmart Hard Drive Protection status The drive light on the computer turns amber to show that the drive is parked. To determine whether a drive is currently protected or whether a drive is parked, select Start > Control Panel > Hardware and Sound > Windows Mobility Center. ● If the software is enabled, a green check mark is superimposed over the hard drive icon. ● If the software is disabled, a red X is superimposed over the hard drive icon.
Replacing the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then, shut down the computer through the operating system. To remove the hard drive: 1. Save your work. 2.
9. Lift the hard drive cover up at an angle and remove it from the computer (2). 10. Disconnect the hard drive cable from the system board (1). 11. Lift the hard drive out of the hard drive bay (2). 12. Disconnect the hard drive cable from the hard drive (1). 13. Remove the screws (2) that secure the protective cover to the hard drive.
14. Slide the protective cover (3) off the hard drive. To install a hard drive: 68 1. Slide the protective cover (1) on to the hard drive. 2. Replace the screws (2) that secure the protective cover to the hard drive. 3. Connect the hard drive cable to the hard drive (3). 4. Insert the hard drive into the hard drive bay at a 45-degree angle (1).
5. Connect the hard drive cable to the hard drive connector on the system board (2). 6. Align the tabs on the hard drive cover with the notches on the computer. 7. Close the cover (1). 8. Tighten the hard drive cover screws (2). 9. Align the tabs (1) on the memory/wireless module compartment cover with the notches on the computer.
10. Close the cover (2). 11. Tighten the memory/wireless module compartment cover screws (3). 12. Replace the battery. 13. Turn the computer right-side up, and then reconnect external power and external devices. 14. Turn on the computer.
7 External devices Using a USB device A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional expansion product. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has 3 USB ports (2 USB ports and 1 combo eSATA/USB port), which support USB 1.0, USB 1.
To remove a USB device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon (the arrow at the left of the notification area). 2. Click the name of the device in the list. NOTE: You are prompted that it is safe to remove the hardware device. 3. Remove the device.
CAUTION: To prevent damage to an eSATA connector, do not pull on the cable to remove the eSATA device. 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon (the arrow at the left of the notification area). 2. Click the name of the device in the list. NOTE: You are prompted that it is safe to remove the hardware device. 3. Remove the device.
8 External media cards Using Digital Media Slot cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs, as well as with other computers.
Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card. 1. Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. 2. To remove a digital card: a. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
9 Memory modules Adding or replacing memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
7. Lift the memory/wireless module compartment cover (2) away from the computer. 8. Remove the memory module from the expansion memory slot: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot.
9. Insert a memory module in the expansion memory slot: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c.
12. Tighten the memory/wireless module compartment cover screws (3). 13. Replace the battery. 14. Turn the computer right-side up, and then reconnect external power and external devices. 15. Turn on the computer. Upgrading a memory module in the primary memory module slot The primary memory module slot is stacked below the expansionary memory module slot. To upgrade a memory module in the primary memory module slot, follow these steps: 1. Save your work. 2. Shut down the computer.
7. Lift the memory/wireless module compartment cover (2) away from the computer. NOTE: If a memory module is installed in the expansion memory module slot, first remove the expansion memory module. 8. Remove the memory module from the primary memory slot: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b.
9. Insert a memory module in the primary memory module slot: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c.
12. Tighten the memory/wireless module compartment cover screws (3). 13. Replace the battery. 14. Turn the computer right-side up, and then reconnect external power and external devices. 15. Turn on the computer.
10 Security Protecting the computer Standard security features provided by the Windows operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks.
You can use the same password for a Setup Utility feature and for a Windows security feature. You can also use the same password for more than one Setup Utility feature. Use the following guidelines when setting a password in Setup Utility: ● A password can be any combination of up to 8 letters and numbers and is case sensitive. ● A password set in Setup Utility must be entered at a Setup Utility prompt. A password set in Windows must be entered at a Windows prompt.
Password Function Power-on password* ● Protects access to the computer contents. ● After this password is set, it must be entered each time you turn on or restart the computer, or exit Hibernation. CAUTION: If you forget your power-on password, you cannot turn on or restart the computer, or exit Hibernation. NOTE: The administrator password can be used in place of the power-on password. *For details about each of these passwords, refer to the following topics.
Entering an administrator password At the Enter Password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again. Power-on password Your power-on password prevents unauthorized use of the computer. After this password is set, it must be entered each time you turn on or restart the computer, or exit Hibernation.
Norton Internet Security software and for purchasing extended update service are provided within the program. To view and access Norton Internet Security, select Start > All Programs > Norton Internet Security. For more information about computer viruses, type viruses in the Search box in Help and Support. Using firewall software When you use the computer for e-mail, network, or Internet access, unauthorized persons may be able to gain access to the computer, your personal files, and information about you.
Using the fingerprint reader Locating the fingerprint reader The fingerprint reader is a small metallic sensor that is located in one of the following areas of your computer: ● Near the bottom of the TouchPad ● On the right side of the keyboard ● On the upper-right side of the display ● On the left side of the display Depending on your computer model, the fingerprint reader may be oriented horizontally or vertically.
Registering fingerprints A fingerprint reader allows you to log on to Windows using a fingerprint that you have registered using DigitalPersona Personal software, instead of using a Windows password. To register one or more fingerprints, follow these steps: 1. In Windows, click the DigitalPersona Personal icon in the notification area, at the far right of the taskbar. 2. Read the welcome text, and then click Next. The “Verify Your Identity” page opens. 3.
Using your registered fingerprint to log on to Windows To log on to Windows using your fingerprint, follow these steps: 90 1. Immediately after you have registered your fingerprints, restart Windows. 2. Swipe any of your registered fingers to log on to Windows.
11 HP QuickWeb QuickWeb is an optional, instant-on environment that is separate from your Windows operating system. QuickWeb allows you to rapidly access a Web browser, and other communication and multimedia programs, without the need to start Windows. QuickWeb is ready to go within seconds of pressing the power button. Refer to the Notebook Essentials guide for additional information on QuickWeb. Disabling and enabling QuickWeb To disable or reenable QuickWeb from within the Windows operating system: 1.
12 Setup Utility Starting Setup Utility Setup Utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working. NOTE: The fingerprint reader cannot be used to access Setup Utility. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start Setup Utility: ▲ Open Setup Utility by turning on or restarting the computer.
Navigating and selecting in Setup Utility Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu or a menu item, use the arrow keys. ● To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or f5 or f6. ● To select an item, press enter. ● To close a text box or return to the menu display, press esc.
Exiting Setup Utility You can exit Setup Utility with or without saving changes. ● To exit Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then, use the arrow keys to select Exit > Exit Saving Changes, and then press enter. ● To exit Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display.
Select To do this Card Reader/1394 Power Saving (select models only) Enable/disable Card Reader/1394 Power Saving. Fan Always On Enable/disable Fan Always On. When enabled, the computer fan will always be on. Boot Options Set the following boot options: ● f10 and f12 Delay (seconds)―Set the delay for the f10 and f12 functions of Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). ● CD-ROM boot―Enable/disable boot from CD-ROM. ● Floppy boot―Enable/disable boot from diskette.
13 Software updates Updated versions of the software provided with your computer may be available on the HP Web site. Most software and BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. To update the software, follow these steps, which are explained in the remainder of this guide: 1.
Downloading a BIOS update CAUTION: To prevent damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source.
To use the HP Web site: 1. Open your Web browser, go to http://www.hp.com/support, and select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the Search box, and then press enter. 3. Click your specific product from the models listed. 4. Select your operating system. 5. When the list of drivers is displayed, click an updated driver to open a window containing additional information. 6.
14 Backup and Recovery Recovery after a system failure is as complete as your most current backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
Note the following guidelines before creating recovery discs: ● You will need high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs are purchased separately. DVDs and BDs have a much higher capacity than CDs. If you use CDs, up to 20 discs may be required, whereas only a few DVDs or BDs are required. NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs, are not compatible with the Recovery Manager software.
● When backing up to discs, use any of the following types of discs (purchased separately): CD-R, CD-RW, DVD+R, DVD-R, or DVD±RW. The discs you use will depend on the type of optical drive installed in your computer. NOTE: DVDs store more information than CDs, so using them for backup reduces the number of recovery discs required. ● When backing up to discs, number each disc before inserting it into the optical drive of the computer.
Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps: 1. Select Start > Control Panel > System and Security > System. 2. In the left pane, click System protection. 3. Click the System Protection tab. 4. Click System Restore. 5. Follow the on-screen instructions. Performing a recovery NOTE: You can recover only files that you have previously backed up.
To restore the system from the partition, follow these steps: 1. Access Recovery Manager in either of the following ways: ● Select Start > All Programs > Recovery Manager > Recovery Manager. – or – ● Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Then, press f11 to enter HP Recovery. 2. Click System Recovery in the Recovery Manager window. 3. Follow the on-screen instructions.
Index Symbols/Numerics 1394 Power Saving 95 A AC adapter connecting 53 identifying 10 testing 54 action keys decreasing screen brightness 27 decreasing the speaker volume 28, 32 Help and Support 27 identifying 4 increasing screen brightness 28 increasing the speaker volume 28, 32 muting or restoring the speaker volume 28, 32 playing the next track/section on a CD, DVD, or BD 28 playing the previous track/ section on a CD, DVD, or BD 28 playing, pausing, or resuming a CD, DVD, or BD 28 stopping a CD, DVD, or
cord, power 10 corporate WLAN connection critical battery level 58 critical security updates, installing 87 16 D default settings, restoring 93 device drivers HP drivers 48 Windows drivers 48 Diagnostics menu 95 digital card defined 74 inserting 74 removing 75 stopping 75 Digital Media Slot, identifying 5 Disk Cleanup software 64 Disk Defragmenter software 64 disk performance 64 display image, switching 28 drive light 6, 65 drive media 50 drives Blu-ray R/RE DVD+/-RW SuperMulti DL Drive 39 Blu-ray ROM DVD
keys action 4 esc 4 fn 4 Windows applications 4 Windows logo 4 L labels Bluetooth 11 HP Mobile Broadband Module 11 Microsoft Certificate of Authenticity 11 regulatory 11 service tag 10 SIM 11 wireless certification 11 WLAN 11 LAN Power Saving 94 language support 94 latch, battery release 8 left TouchPad button, identifying 1 light, drive 65 lights battery 5 caps lock 2 drive 6 fingerprint reader 2 mute 2 power 2, 6 RJ-45 (network) 6 TouchPad 2 webcam 7 wireless 2 local area network (LAN) cable required 22 c
power connecting 53 conserving 61 power button, identifying 3 power connector, identifying 5 power cord, identifying 10 power light, identifying 2, 6 power-on password creating 86 entering 86 managing 86 Processor C6 State 94 Product Key 11 product name and number, computer 10 programs updating 97 using 34 projector, connecting 36 protecting playback 45 public WLAN connection 16 Q QuickWeb disabling 91 enabling 91 R readable media 50 recovering a program or driver 99 recovering from the dedicated recovery p
using system restore 101 V VCR 36 vents, identifying 8 Virtualization Technology 94 W webcam adjusting the properties 49 identifying 7 using 48 webcam light 32 Windows applications key, identifying 4 Windows logo key, identifying 4 Windows, passwords set in 84 wireless antennas 8 Wireless Assistant software 13 wireless certification label 11 wireless controls action key 13 HP Wireless Assistant software 13 operating system 13 wireless icon 12 wireless light 2, 13 wireless module compartment, identifying 8 w