HP Pavilion dm3 Entertainment PC User Guide
© Copyright 2009 Hewlett-Packard Development Company, L.P. ATI is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HewlettPackard Company under license. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Getting started Using HP QuickWeb (select models only) ............................................................................................ 1 2 Features Identifying hardware ............................................................................................................................. 2 Components ......................................................................................................................................... 2 Top components ................
Cannot connect to a preferred WLAN network .................................................................. 21 Network icon for WLAN is not displayed ............................................................................ 22 Current WLAN network security codes are unavailable .................................................... 22 WLAN connection is very weak ......................................................................................... 23 Cannot connect to the wireless router ............
Setting power devices ........................................................................................................................ 39 Using power-saving states ................................................................................................. 39 Initiating and exiting Sleep ................................................................................ 39 Initiating and exiting Hibernation .......................................................................
Drives and external devices Drives ................................................................................................................................................. 54 Identifying installed drives .................................................................................................. 54 Handling drives .................................................................................................................. 54 Improving hard drive performance ............................
Starting Setup Utility ........................................................................................................................... 70 Using Setup Utility .............................................................................................................................. 70 Navigating and selecting in Setup Utility ............................................................................ 70 Changing the language of Setup Utility ...................................................
x
1 Getting started Your computer's main operating system is Microsoft® Windows®. Your computer may also feature HP QuickWeb (select models only). ● The Microsoft Windows operating system displays the desktop on the display and controls your computer's hardware, peripherals, and software programs.
2 Features Identifying hardware To see a list of hardware installed in the computer, select Start > Control Panel > System and Security. Then in the System area, click Device Manager. You can also add hardware or modify device configurations using Device Manager. NOTE: Windows® includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings.
Component Description (5) TouchPad scroll zone Scrolls up or down. (6) Right TouchPad button* Functions like the right button on an external mouse. *This table describes factory settings. To view and change pointing device preferences, select Start > Devices and Printers. Then, right-click the device representing your computer, and click Mouse settings. Lights Component Description (1) Caps lock light On: Caps lock is on. (2) Mute light On: Computer sound is off.
Keys Component 4 Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Executes frequently used system functions when pressed in combination with an arrow key, the num lk key, or the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the cursor.
Front components Component Description (1) Speakers (2) Produce sound. (2) Battery light On: A battery is charging. Blinking: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged.
Component Description ● When the computer is in the Sleep state, slide the switch briefly to exit Sleep. ● When the computer is in Hibernation, slide the switch briefly to exit Hibernation. If the computer has stopped responding and Windows® shutdown procedures are ineffective, slide and hold the power switch for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Security > Power Options.
Component Description (5) HDMI port Connects an optional video or audio device, such as a highdefinition television, or any compatible digital or audio component. (6) USB ports (2) Connect optional USB devices. NOTE: Select models can be configured with an optional external USB optical disc drive. For more information, refer to the printed Quick Setup poster.
Bottom components Component Description (1) Subscriber identity module (SIM) slot (select models only) Located inside the battery bay. (2) Battery bay Holds the battery. (3) Battery release latch Releases the battery from the battery bay. (4) Vents (6) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.
Component Description CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Display components Component Description (1) Internal microphone Records sound.
Wireless antennas Component Description (1) WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wireless wide-area networks (WWANs). (2) WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). *The antennas are not visible from the outside of the device. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
Additional hardware components Component Description (1) Power cord* Connects the AC adapter. (2) AC adapter Converts AC power to DC power. (3) Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by country or region. Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer.
◦ Model description (4). This is the alphanumeric identifier you use to locate documents, drivers, and support for your notebook. ◦ Warranty period (5). This number describes the duration of the warranty period for this computer. Have this information available when you contact technical support. The service tag label is affixed to the bottom of the computer. 12 ● Microsoft® Certificate of Authenticity—Contains the Windows® Product Key.
3 Wireless and local area networks Using wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
HP Connection Manager Opens HP Connection Manager, which enables you to create a connection with an HP Mobile Broadband device (select models only). Wired network (connected) Indicates that one or more of your network drivers are installed and one or more network devices are connected to the network.
Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off the wireless devices simultaneously. Individual wireless devices can be controlled through Wireless Assistant software. Using Wireless Assistant software A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is disabled in Setup Utility, it must be reenabled in Setup Utility before it can be turned on or off using Wireless Assistant.
For more information, select Start > Help and Support. Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably.
When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA)Personal and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the network, other WLAN devices can pick up unprotected signals and either connect to your network (uninvited) or capture information being sent across it.
HP Mobile Broadband supports the following technologies: ● HSPA (High Speed Packet Access), which provides access to networks based on the Global System for Mobile Communications (GSM) telecommunications standard. ● EV-DO (Evolution Data Optimized), which provides access to networks based on the code division multiple access (CDMA) telecommunications standard. You may need the HP Mobile Broadband Module serial number to activate mobile broadband service.
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated. 8. Replace the battery. NOTE: HP Mobile Broadband is disabled if the battery is not replaced. 9. Reconnect external power. 10. Reconnect external devices. 11. Turn on the computer. Removing a SIM To remove a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch.
7. Press in on the SIM (1), and then remove it from the slot (2). 8. Replace the battery. 9. Reconnect external power. 10. Reconnect external devices. 11. Turn on the computer.
Troubleshooting wireless connection problems Some possible causes for wireless connection problems include the following: ● Network configuration (SSID or security) has been changed. ● Wireless device is not installed correctly or has been disabled. ● Wireless device or router hardware has failed. ● Wireless device encountered interference from other devices. NOTE: Wireless networking devices are included with select computer models only.
Network icon for WLAN is not displayed If the network status icon is not displayed in the notification area after you configure the WLAN, the software driver is either missing or corrupted. A Windows “Device not Found” error message may also be displayed. The driver must be reinstalled. Get the latest version of the WLAN device software and drivers for your computer from the HP Web site at http://www.hp.com.
WLAN connection is very weak If the connection is very weak, or if your computer cannot make a connection to a WLAN, follow the steps below to minimize interference from other devices: ● Move your computer closer to the wireless router or access point. ● Temporarily disconnect devices such as a microwave, cordless phone, or cellular phone to be sure that other wireless devices are not interfering.
2. 24 Plug the other end of the cable into a network wall jack (2).
4 Pointing devices and keyboard Using pointing devices NOTE: In addition to the TouchPad, you can also connect an external USB mouse to the computer using one of the USB ports on the computer. Setting pointing device preferences To access Mouse Properties, select Start > Devices and printers. Then, right-click the device representing your computer, and click Mouse settings.
Rotating (select models only) NOTE: For some computer models, rotating is enabled at the factory. To disable rotating, select Control panel > Hardware and Sound > Mouse > Multitouch Gestures. Then, clear the check box next to the function you want to disable. Rotating allows you to rotate items such as photos and pages. To rotate, anchor your thumb on the TouchPad, and then move your forefinger in a semicircular motion around your thumb.
NOTE: Your computer also supports additional TouchPad features. To enable these features, select Start > Devices and Printers. Then, right-click the device representing your computer, and select Mouse settings. Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. To use an action key, press and hold this key to activate the assigned function.
Key Icon Description Decrease brightness Decreases the screen brightness level incrementally. Increase brightness Increases the screen brightness level incrementally. Sleep Initiates Sleep. Switch screen image Switches the screen image among display devices connected to the system.
Hotkey Description fn+esc Displays information about system hardware components and the system BIOS version number. fn+up arrow Scrolls the page up. fn+down arrow Scrolls the page down. fn+left arrow Depending on the software, one of the following functions occurs: ● Returns the cursor to the beginning of the line where the cursor is located. – or – ● fn+right arrow Returns to the beginning of the document.
Component Description (1) fn key Enables/disables the embedded numeric keypad when pressed in combination with the num lk key. (2) Embedded numeric keypad Can be used like an external numeric keypad. (3) num lk key Enables/disables the embedded numeric keypad when pressed in combination with the fn key. (4) Num lock light ● On: The embedded numeric keypad is enabled. – or – ● On: Num lock is enabled on a connected optional numeric keypad.
Switching key functions on the embedded numeric keypad You can temporarily alternate the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the fn key or the fn+shift key combination. ● To change the function of a keypad key to keypad functions while the keypad is off, press and hold the fn key while pressing the keypad key.
5 Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures.
NOTE: Volume can also be controlled through the Windows operating system and some programs. Using the media activity keys The media activity keys control the play of an audio CD or a DVD or BD that is inserted into an external optical drive (select models only). ● When an audio CD or a DVD or BD is not playing, press the play/pause key (2) to play the disc.
Using HP MediaSmart software HP MediaSmart turns your computer into a mobile entertainment center. With MediaSmart, you can enjoy music and DVD and BD movies. You can also manage and edit your photo collections. MediaSmart includes the following features: ● ● Playlist upload support: ◦ Upload your MediaSmart photo playlists to Internet photo albums, such as Snapfish. ◦ Upload your MediaSmart video playlists to YouTube. ◦ Export your MediaSmart playlist to the CyberLink DVD Suite.
● Create multimedia presentations using audio and images ● Transmit sound and images with instant messaging programs ● Stream radio programs ● Create (burn) audio CDs using an optional optical drive Connecting external audio devices WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and Environmental Notices.
● Edit pictures and video and create presentations ● Connect external video devices Connecting an external monitor or projector The external monitor port connects an external display device such as an external monitor or a projector to the computer. ▲ To connect a display device, connect the device cable to the external monitor port. NOTE: If a properly connected external display device does not display an image, press the switch screen image key to transfer the image to the device.
To connect a video or audio device to the HDMI port: 1. Connect one end of the HDMI cable to the HDMI port on the computer. 2. Connect the other end of the cable to the video device, according to the device manufacturer’s instructions. 3. Press the switch screen image key on the computer to switch the image between the display devices connected to the computer.
For optimum performance, observe the following guidelines while using the webcam: ● If you are having trouble viewing or sending multimedia files to someone on another LAN or outside your network firewall, temporarily disable the firewall, perform the task you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall as necessary, and adjust the policies and settings of other intrusion detection systems.
6 Power management Setting power devices Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power light blinks and the screen clears. Your work is saved to memory, thereby conserving power and letting you exit Sleep faster than exiting Hibernation. While the computer is in the Sleep state, the power light blinks.
Initiating and exiting Hibernation The system is set at the factory to initiate Hibernation after 1,080 minutes (18 hours) of inactivity when running on battery power, 1,080 minutes (18 hours) of inactivity when running on external power, or when the battery reaches a critical battery level. Power settings and timeouts can be changed using Power Options in Windows Control Panel. To initiate Hibernation: ▲ Click Start, click the arrow next to the Shut down button, and then click Hibernate.
Selecting a different power plan ▲ Click the battery meter icon in the notification area, and then select a power plan from the list. – or – Select Start > Control Panel > System and Security > Power Options, and then select a power plan from the list. Customizing power plans 1. Click the battery meter icon in the notification area and then click More power options. – or – Select Start > Control Panel > System and Security > Power Options. 2. Select a power plan, and then click Change plan settings.
When you disconnect external AC power, the following events occur: ● The computer switches to battery power. ● The display brightness is automatically decreased to save battery life. To increase display brightness, press the f2 hotkey or reconnect the AC adapter. Connecting AC power WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times.
To test the AC adapter: 1. Remove the battery from the computer. 2. Connect the AC adapter to the computer, plug the power cord into the AC adapter, and then plug the power cord into an AC outlet. 3. Turn on the computer. ● If the power light turns on, the AC adapter is working properly. ● If the power light remains off, the AC adapter is not functioning and should be replaced. Contact technical support for information on obtaining a replacement AC power adapter.
To run Battery Check: 1. Connect the AC adapter to the computer. NOTE: The computer must be connected to external power for Battery Check to function properly. 2. Select Start > Help and Support > Troubleshoot > Power, Thermal and Mechanical. 3. Click the Power tab, and then click Battery Check. Battery Check examines the battery and its cells to see if they are functioning properly, and then reports the results of the examination.
3. Remove the battery (3). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter or an optional power adapter. The battery charges whether the computer is off or in use, but it charges faster when the computer is off. Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer or cooler than room temperature.
Maximizing battery discharge time Battery discharge time varies depending on the features you use while on battery power. Maximum discharge time gradually shortens, as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time: ● Lower the brightness on the display. ● Check the Power saver setting in Power Options. ● Remove the battery from the computer when it is not being used or charged. ● Store the battery in a cool, dry location.
Resolving a low battery level CAUTION: To reduce the risk of losing information when the computer reaches a critical battery level and has initiated Hibernation, do not restore power until the power lights turn off. Resolving a low battery level when external power is available ▲ Connect one of the following devices: ● AC adapter ● Optional expansion product or docking device ● Optional power adapter Resolving a low battery level when a charged battery is available 1.
To fully charge the battery: 1. Insert the battery into the computer. 2. Connect the computer to an AC adapter, optional power adapter, optional expansion product, or optional docking device, and then plug the adapter or device into external power. The battery light on the computer turns on. 3. Leave the computer plugged into external power until the battery is fully charged. The battery light on the computer turns off. Step 2: Disable Hibernation and Sleep 1.
Step 4: Fully recharge the battery To recharge the battery: 1. Plug the computer into external power and maintain external power until the battery is fully recharged. When the battery is recharged, the battery light on the computer turns off. You can use the computer while the battery is recharging, but the battery charges faster if the computer is off. 2. If the computer is off, turn it on when the battery is fully charged and the battery light has turned off.
To prolong the charge of a stored battery, place it in a cool, dry place. Calibrate a battery before using it if it has been stored for one month or more. Disposing of a used battery WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water.
7 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by replacing the existing memory module. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components.
9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs on the memory module compartment cover with the notches on the computer (1) and close the cover (2). 12. Tighten the 2 memory module compartment screws (3). 13. Replace the battery. 14. Turn the computer right-side up, and then reconnect external power and external devices. 15. Turn on the computer.
8 Drives and external devices Drives Identifying installed drives Your computer includes a hard drive (with a rotating disc) or a solid state-drive (SSD) with solid-state memory. Because it has no moving parts, an SSD does not generate as much heat as a hard drive. To view the drives installed on the computer, select Start > Computer. NOTE: Windows® includes the User Account Control feature to improve the security of your computer.
CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions: Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive. Before handling a drive, discharge static electricity by touching the unpainted metal surface of the drive. Do not touch the connector pins on a removable drive or on the computer.
To run Disk Cleanup: 1. Select Start > All Programs > Accessories > System Tools > Disk Cleanup. 2. Follow the on-screen instructions. Replacing the hard drive in the hard drive bay CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation.
11. Pivot the hard drive upward (3) and lift the hard drive out of the hard drive bay (4). To install a hard drive: 1. Insert the hard drive into the hard drive bay (1). 2. Pivot the hard drive downward (2), and then slide the hard drive (3) to the right until the hard drive snaps into place. 3. Tighten the 2 screws (4) that secure the hard drive to the computer. 4. Align the tabs (1) on the hard drive cover with the notches on the computer. 5. Close the cover (2).
6. Tighten the 3 hard drive cover screws (3). Using HP ProtectSmart Hard Drive Protection (select models only) HP ProtectSmart Hard Drive Protection protects a hard drive by parking the drive and halting data requests under either of the following conditions: ● You drop the computer. ● You move the computer with the display closed while the computer is running on battery power.
To enable the notification area icon: 1. Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive Protection. NOTE: If prompted by User Account Control, click Yes. 2. On the Icon in System Tray row, click Show. 3. Click OK. Managing power with a parked hard drive If HP ProtectSmart Hard Drive Protection has parked the drive, the computer will behave in the following ways: ● The computer will not shut down.
● DVD-ROM Drive ● DVD/CD-RW Combo Drive ● DVD±RW and CD-RW Combo Drive ● DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive ● DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe ● Blu-ray ROM DVD±R/RW SuperMulti DL Drive ● Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive NOTE: For more information about required software and drivers, or to learn which computer port to use, refer to the manufacturer's instructions.
External devices Using a USB device A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional docking device or optional expansion product. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has 4 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices.
To remove a USB device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon (the arrow at the left of in the notification area. 2. Click the name of the device in the list. NOTE: You are prompted that it is safe to remove the hardware device. 3. Remove the device.
2. Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of options may be displayed. Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card. 1. Save your information and close all programs associated with the digital card.
9 Security Protecting the computer Standard security features provided by the Windows® operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks.
Use the following guidelines when setting a password in Setup Utility: ● A password can be any combination of up to 8 letters and numbers and is case sensitive. ● A password set in Setup Utility must be entered at a Setup Utility prompt. A password set in Windows must be entered at a Windows prompt. Use the following tips for creating and saving passwords: ● When creating passwords, follow requirements set by the program.
Administrator password Your administrator password protects the configuration settings and system identification information in Setup Utility. After this password is set, you must enter it each time you access Setup Utility. Your administrator password is not interchangeable with an administrator password set in Windows, nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and store it in a safe place.
Managing a power-on password To set, change, or delete this password, follow these steps: 1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press f10. – or – Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10. 2.
Firewall features include logging and reporting of network activity, and automatic monitoring of all incoming and outgoing traffic. Refer to the firewall user guide or contact your firewall manufacturer for more information. NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized e-mail attachments.
10 Changing QuickWeb settings Disabling and enabling QuickWeb To disable or reenable QuickWeb from within the Windows operating system: 1. Click Start > All Programs > HP QuickWeb. The HP QuickWeb Installer folder opens. Click HP QuickWeb Configuration Tool. 2. Select the Enable QuickWeb check box. 3. Click OK. NOTE: The HP QuickWeb Configuration Tool can also be accessed by clicking Start > Control Panel, and then clicking the View by arrow.
A Setup Utility (BIOS) Starting Setup Utility Setup Utility is a ROM-based information and customization utility that can be used even when your Windows® operating system is not working. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start Setup Utility: ▲ Open Setup Utility by turning on or restarting the computer.
3. Use the arrow keys to select a language, and then press enter. 4. When a confirmation prompt with your language selected is displayed, press enter. 5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then press enter. Your change goes into effect immediately. Displaying system information The following procedure explains how to display system information in Setup Utility. If Setup Utility is not open, begin at step 1.
Exiting Setup Utility You can exit Setup Utility with or without saving changes. ● To exit Setup Utility and save your changes from the current session: If Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter. ● To exit Setup Utility without saving your changes from the current session: If Setup Utility menus are not visible, press esc to return to the menu display.
Select To do this Boot Options Set the following boot options: LAN Power Saving (select models only) ● POST Hot Key Delay (sec.)―Set the delay for the user to press hot keys in intervals of 5 seconds each (0, 5, 10, 15, 20). ● QuickWeb Support―Enable/disable the QuickWeb Boot Menu during Setup Utility. Set the delay for the user to start Setup Utility in 5 or 10 second intervals. ● CD-ROM Boot―Enable/disable boot from CD-ROM ● Floppy Boot―Enable/disable boot from diskette.
To use Setup Utility for displaying BIOS information: 1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press f10. 2. If Setup Utility does not open with the system information displayed, use the arrow keys to select the Main menu. When the Main menu is selected, BIOS and other system information is displayed. 3.
The BIOS installation begins. 5. Complete the installation by following the instructions on the screen. The system automatically shuts down after the BIOS has successfully updated. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Updating programs and drivers To download and install software other than a BIOS update, follow these steps: 1.
B Backup and recovery Recovery after a system failure is as complete as your most current backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
● Number each disc before inserting it into the optical drive. ● If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open Recovery Manager, you will be prompted to continue the disc creation process. To create a set of recovery discs: 1. Select Start > All Programs > Recovery Manager > Recovery Disc Creation. Recovery Manager opens. 2. Follow the on-screen instructions.
NOTE: The external optical drive must be connected to a USB port on the computer, not to a USB port on another external device, such as a hub or docking station. NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them for backup reduces the number of recovery discs required. ● When backing up to discs, number each disc before inserting it into the optical drive of the computer.
Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps: 1. Select Start > Control Panel > System and Security > System. 2. In the left pane, click System protection. 3. Click the System Protection tab. 4. Click the System Restore button. 5. Follow the on-screen instructions. Performing a recovery NOTE: You can recover only files that you have previously backed up.
Index A AC adapter identifying 11 testing 42 AC adapter light, identifying 6 AC power, connecting 42 action key mode 72 action keys audio CD, DVD, or BD controls 28 decrease screen brightness 28 identifying 4 muting speaker sound 28 QuickLock 28 Sleep 28 switching screen image 28 using 27 volume 32 administrator password creating 66 entering 66 managing 66 airport security devices 55 antennas 10 antivirus software, using 67 applications key, Windows 4 audio devices, connecting external 35 audio functions, c
entering a power-on password 67 entering an administrator password 66 esc key, identifying 4 external audio devices, connecting 35 external drive 59 external monitor port, identifying 6, 36 external optical drive 34 F f11 79 fan always on 72 firewall 17 firewall software, using 67 fn key, identifying 4, 28 full system recovery 76 H hard drive external 59 HP ProtectSmart Hard Drive Protection 58 installing 57 removing 56 replacing 56 hard drive bay, identifying 8 HDMI port, identifying 7, 36 HDMI, connecting
monitor port, external 6 monitor, connecting 36 mouse, external setting preferences 25 multimedia software installing 34 using 34 mute key using 32 mute light, identifying 3 N network cable connecting 23 noise suppression circuitry 23 network icon 13, 22 network key 22 network security codes network key 22 SSID 22 noise suppression circuitry, network cable 23 num lk key identifying 4 num lock light, identifying 3, 30 num lock, external keypad 31 O operating system Microsoft Certificate of Authenticity label
T temperature 49 TouchPad buttons 2 identifying 2 scrolling regions 3 using 25 TouchPad gestures pinching 26 rotating 26 scrolling 25 zooming 26 TouchPad light, identifying 2 TouchPad on/off button 2 traveling with the computer 49 turning off the computer 50 U unresponsive system 50 USB cable, connecting 61 USB devices connecting 61 description 61 removing 61 stopping 61 USB hubs 61 USB ports, identifying 6, 7, 61 Wireless Assistant software 14, 15 wireless button 14 wireless button, identifying 6 wireless
