Specifications

5–70 Maintenance and Service Guide
Removal and Replacement Procedures
5.19 Fan Assembly
✎
The fan assembly is included in the heat sink assembly spare
part kit, spare part number 384622-001. Refer to refer Section
5.10, “Heat Sink,” for information on removing the heat sink.)
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Hard drive (Section 5.4)
b. Switch cover (Section 5.12)
c. Keyboard (Section 5.13)
d. Display assembly (Section 5.14)
e. Top cover (Section 5.15)
f. System board (Section 5.18)
2. Turn the system board upside down with the right side
toward you.
3. Disconnect the fan cable 1 from the system board.
4. Remove the 4 Phillips PM2.5×7.0 screws 2 that secure the
fan assembly to the system board.
5. Remove the fan assembly 3.
Removing the Fan Assembly