System information

10. If it is necessary to remove the display panel cable or access the webcamera and microphone, follow
these steps. With the display bezel upside down, disconnect the cable from the webcamera/microphone
(1) and from the routing channel built into the back cover.
Carefully release the cable from the channel guides, the guides in the display hinge, and remove the
display panel cable (2). Lift the cable (3) to remove it.
11. On select models, removing the cable also requires disengaging it from the channels in the hinges and
disconnecting from the display panel. To disconnect the cable from the display panel, carefully remove
the foil tape at the bottom of the display panel and then carefully lift the display cable connector (1)
and remove the display connector (2).
78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts