System information

1. Release the metal clip to disconnect the power connector cable (1) from the system board.
2. Disengage the cable from the clips (2).
3. Release the clips (3), and then remove the power connector cable (4).
Reverse this procedure to install the power connector cable and bracket.
Fan
Description Spare part number
For use with HP Pavilion 15 Notebook PC computer models 762505-001
For use with HP Pavilion 17 Notebook PC computer models 765788-001
Before removing the Fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 61),
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
Base enclosure on page 65).
7. Remove the WLAN module (see
WLAN module on page 80).
8. Remove the system board (see
System board on page 89).
102 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts