Quick Start Manual

Quick Start Guide
35
Filename: ma3rbqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 41 Page: 35 of 148 Printed: 04/15/03 05:07 PM
Basics
Using a Microphone
Your PC comes with one microphone connector in
the back of the PC. Some models have another
microphone connector in the front of the PC.
Only one microphone connector works at a time,
and the back connector is ready to use. For PCs
with the multi-channel audio speakers option,
the microphone connector in the front of the PC,
if present, is ready to use; see “To use the
microphone with multi-channel audio” on
page 33.
To connect a microphone to the front of your PC,
select the working microphone:
Note:
If you connect your microphone to the back of your
PC, you do not need to perform this procedure.
1 Double-click the Volume icon on the
taskbar. The Volume Control settings
window opens.
Note:
If you do not see this Volume icon, click
Start, Control Panel, Sounds, Speech,
and Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to
open the Sounds and Audio Devices Properties
window. On Volume tab, place a tick in the
Place volume icon in the taskbar tick box. Click
Apply, and then click OK. The Volume icon
appears in the taskbar.
2 In the Volume Control window, select Options
and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a
tick in the Microphone tick box.
5 Click OK.
6 Click the Advanced button in the
Microphone column. If you do not see the
Advanced button, select Options from the
Recording Control window, and then click
Advanced Controls.