Quick Start Manual

Quick Start Guide
43
Filename: ma3rbqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 41 Page: 43 of 148 Printed: 04/15/03 05:07 PM
Basics
Hibernation mode
When the PC is in hibernation mode, it saves
everything that is in PC memory to the hard disk,
turns off the monitor and the hard disk, and then
turns itself off. When you turn on the PC,
everything (programs, folders and documents) is
restored to the screen.
To manually put the PC into hibernation:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Press and hold down the Shift key on the
keyboard, and click Hibernate.
Note:
If Hibernate is not present, you first need to
set up your PC for hibernation; refer to steps 1
through 6 of “Automatic standby or
hibernation mode” on page 44.
4 When you want to use the PC again after
hibernation, press the On button on the front
of the PC.
If the PC does not work properly when you wake
it from hibernation, restart the PC:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Restart.