Quick Start Manual

40
HP Pavilion home PC
Filename: ma3rbqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 41 Page: 40 of 148 Printed: 04/15/03 05:07 PM
Disabling the TV option
When you want to disconnect the TV from the
computer, you may need to disable the TV option
to return your computer display to its original
resolution.
To disable the TV option:
1 Right-click an empty area of the screen.
2 Click Properties.
3 Click the Settings tab.
4 Click the Advanced button.
5 Click the nView tab, click the nView
Display Mode in the list on the left, and then
select the Standard [Dualview] option.
Important:
If you viewed the PC image on just the TV,
do the following: With Standard [Dualview]
selected under nView Display Mode, click the
Device Settings button, choose Select Output
Device, and then select the Analog Display
option.
6 Click the OK button, and then click OK again.
7 When the PC image appears on the monitor
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
Disconnecting the TV
1 Disable the TV option. See the previous
procedure.
2 Turn off the TV and the PC.
3 Remove the video cable at the TV and the PC.
4 Remove the audio cable at the TV and the PC.
5 Reconnect your computer speaker cable to the
Line Out socket (lime green connector) on the
back of the computer.