Quick Start Manual

36
HP Pavilion home PC
Filename: sb3rwqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: anns Last Saved By: billm
Revision #: 142 Page: 36 of 138 Printed: 02/05/03 11:09 AM
4 When the Windows desktop appears,
right-click an empty area of the desktop.
5 Click Properties.
6 Click the Settings tab.
7 Click the Advanced button.
8 Click the nView tab, if available, and
under nView Modes select Clone to view the
computer image on your PC monitor and your
TV simultaneously.
Important:
You can view the PC image on just
the TV. Under nView Modes, select Standard
[nView disabled], click the Device
Settings button, choose Select Output
Device, and then select the TV option.
9 Click the OK button, and then click OK again.
10 When the PC image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
Disabling the TV option
When you want to disconnect the TV from the
computer, you may need to disable the TV option
to return your computer display to its original
resolution.
To disable the TV option:
1 Right-click an empty area of the screen.
2 Click Properties.
3 Click the Settings tab.
4 Click the Advanced button.
5 Click the nView tab, and then select the
Standard [nView disabled] option.
Important:
If you viewed the PC image on just the
TV, do the following: With Standard [nView
disabled] selected under nView Modes, click
the Device Settings button, choose Select
Output Device, and then select the Analog
Display option.