Specifications

Filename: sa37010.doc Title: HP-Print2k.dot
Template: HP-Print2K_vertical.dot Author: billm Last Saved By: JimL
Revision #: 63 Page: 16 of 18 Printed: 10/15/02 11:05 AM
Warning: Always disconnect the modem cord from the
telephone system before installing or removing your
computer cover.
Warning: Do not operate the computer with the cover
removed.
Warning: The power supply is not user-serviceable. To
prevent damage to the power supply, have a qualified
person repair or replace it. All other components are
user-serviceable.
Warning: For your safety, always unplug the system
from its power source and from any telecommunications
systems (such as phone lines), networks, or modems before
performing any of the procedures described in this guide.
Failure to do so may result in personal injury or equipment
damage. Hazardous voltage levels are inside the power
supply and modem of this product.
Lithium Battery Caution
Warning: The PC uses a lithium battery, type CR2032.
There is danger of explosion if the battery is incorrectly
replaced. Replace only with the same, or equivalent, type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Laser Safety Statement
Class 1 LED Product
The CD-ROM and DVD-ROM drives contain a laser system and are classified as a
“Class 1 Laser Product” under a U.S. Department of Health and Human Services
(DHHS) Radiation Performance standard according to the Radiation Control for
Health and Safety Act of 1968.
Should the unit ever require maintenance, contact an authorized service location.
Warning: Use of controls, adjustments, or performance
procedures other than those specified in the Upgrading and
Servicing the PC guide may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not
try to open the enclosure of the CD-ROM or DVD-ROM.
Laser Product Label
The following label or equivalent is located on the surface of HP laser products:
This label indicates that the product
is classified as a CLASS 1 LASER
PRODUCT. This label appears on a
laser device installed in your
product.