Owner's manual

Components Description
(3) microSD memory card reader Supports micro SD cards.
To insert a card:
Remove the tablet from the keyboard base. Hold the card
label-side up, with connectors facing the slot, insert the
card into the slot, and then push in on the card until it is
firmly seated.
To remove a card:
Press in on the card it until it pops out.
(4)
Audio-out (headphone)/Audio-in
(microphone) combo jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also
connects an optional headset microphone. This jack does
not support optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust
the volume before using headphones, earbuds, or a
headset. For additional safety information, see the
Regulatory, Safety and Environmental Notices. To access
this guide, from the Start screen, type support, select the
HP Support Assistant app.
NOTE: When a device is connected to the jack, the
computer speakers are disabled.
NOTE: Be sure that the device cable has a 4-conductor
connector that supports both audio-out (headphone) and
audio-in (microphone).
(5) Docking port/power connector Connects the tablet to the keyboard base and connects an
AC adapter.
(6)
Power connector Connects an AC adapter.
(7) Volume button Controls speaker volume on the tablet.
●
To increase speaker volume, press the + edge of the
button.
●
To decrease speaker volume, press the – edge of the
button.
Tablet edge components 7