Installation and Upgrade Guide

You must enter the device name for the target disk on which
the layered product(s) removal will be performed.
Enter device name for target disk: [DKB300:] (? for choices) DKB300
DKB300: is labeled V82SYS.
The remove operation can provide brief or detailed descriptions.
In either case, you can request the detailed descriptions by typing "?".
Do you always want detailed descriptions? (Yes/No) [No] NO
1 - HP I64VMS AVAIL_MAN_BASE V8.3 Layered Product
2 - HP I64VMS CDSA V2.3-306 Layered Product
3 - HP I64VMS DECNET_PHASE_IV V8.3 Layered Product
4 - HP I64VMS DECNET_PLUS V8.3 Layered Product
5 - HP I64VMS DWMOTIF V1.6 Layered Product
6 - HP I64VMS DWMOTIF_SUPPORT V8.3 Layered Product
7 - HP I64VMS KERBEROS V3.1-152 Layered Product
8 - HP I64VMS SSL V1.3-284 Layered Product
9 - HP I64VMS TCPIP V5.6 Layered Product
10 - HP I64VMS TDC_RT V2.3-1 Layered Product
11 - HP I64VMS WBEMCIM V2.61-A070728 Layered Product
12 - HP I64VMS WBEMPROVIDERS V1.5-31 Layered Product
13 - All products listed above
? - Help
E - Exit
Choose one or more items from the menu separated by commas:
1.4.7 Using the Patches and Recovery Data Option (7)
Select option 7 to install or undo patches and to perform related operations. When you select
option 7, the following options submenu appears:
This procedure can perform one of the following operations:
1) Install one or more patches
2) Undo recent patches for which there is recovery data
3) Show recovery data
4) Delete recovery data
5) Find patch kits
Enter CHOICE or X to return to main menu: (1/2/3/4/5/X)
Note the following about these options:
• When you choose submenu option 1, the following information is displayed:
NOTE: Some patch kits cannot be correctly installed by this
procedure; this includes patch kits for versions of
OpenVMS prior to V8.3. Patches for OpenVMS V8.3 and
later install correctly. For patches to other products,
check with the patch kit provider, or install the patch
from the running system.
Options 2 through 5 (undo, show, delete, and find) will work
correctly for all patch kits.
• When you choose submenu option 1, 2, 3, or 4, you are prompted for the target device on
which to perform the operation:
You must enter the device name for the target disk on which
the operation will be performed.
1.4 Using the Operating System Menu 41