Installation and Upgrade Guide
HP I64VMS TCPIP V5.6 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS VMS V8.3-1H1 Oper System Install 25-SEP-2007 18:04:23
HP I64VMS SSL V1.3-284 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS WBEMCIM V2.61-A070728 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS WBEMPROVIDERS V1.5-31 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS TDC_RT V2.3-1 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS AVAIL_MAN_BASE V8.3 Full LP Remove 25-SEP-2007 18:04:23
HP I64VMS CDSA V2.2 Full LP Remove 25-SEP-2007 18:04:23
HP I64VMS DECNET_PHASE_IV V8.3 Full LP Remove 25-SEP-2007 18:04:23
HP I64VMS DWMOTIF V1.6 Full LP Remove 25-SEP-2007 18:04:23
HP I64VMS OPENVMS V8.3 Platform Remove 25-SEP-2007 18:04:23
HP I64VMS VMS V8.3 Oper System Remove 25-SEP-2007 18:04:23
HP I64VMS KERBEROS V3 Transition Remove 25-SEP-2007 18:04:23
HP I64VMS KERBEROS V3 Transition Reg Product 25-SEP-2007 17:20:44
HP I64VMS CDSA V2.1 Full LP Install 27-AUG-2004 21:07:15
HP I64VMS DECNET_PHASE_IV V8.2 Full LP Install 27-AUG-2004 21:07:15
HP I64VMS DWMOTIF V1.5 Full LP Install 27-AUG-2004 21:07:15
HP I64VMS OPENVMS V8.3 Platform Install 27-AUG-2004 21:07:15
HP I64VMS TCPIP V5.4-18 Full LP Install 27-AUG-2004 21:07:15
HP I64VMS VMS V8.3 Oper System Install 27-AUG-2004 21:07:15
----------------------------------- ----------- ----------- --------------------
26 items found
Press Return to continue...
NOTE: The products listed in the product history vary from system to system, depending on
the actual history of the system. For definitions of the kit types, see the HP POLYCENTER Software
Installation Utility Developer’s Guide.
1.4.5 Using the Reconfigure Installed Products Option (5)
Use option 5 to reconfigure layered products, including the DECwindows graphical user interface
and HP networking products. This allows you to change the product choices you made during
a previous installation or upgrade.
You can reconfigure a product only if all of the following conditions are true:
• The product is available for installation while your system is booted from the operating
system media. For information about displaying products that are available for installation,
see Section 1.4.2 (page 35) (option 2 on the main menu).
• The product is installed. For information about displaying installed products, see Section 1.4.4
(page 38) (option 4 on the main menu).
• The version of the product that is available for installation is the same as the version of the
product that is installed.
When you select option 5 on the operating system main menu, the procedure prompts you for
a target disk name and asks whether you want brief or detailed descriptions about the
reconfiguration options. The procedure then lists the products you can configure. You can select
any or all of these products, or you can exit without reconfiguring products.
The following is a sample display of the prompts and information that might appear when you
select option 5. The version numbers in this example do not necessarily reflect the version numbers
of the products actually shipped with OpenVMS Version 8.3-1H1.
This procedure will ask a series of questions.
() - encloses acceptable answers
[] - encloses default answers
Type your response and press the <Return> key. Type:
? - to repeat an explanation
^ - to change prior input (not always possible)
Ctrl/Y - to exit the installation procedure
1.4 Using the Operating System Menu 39