Installation and Upgrade Guide

NOTE: When you boot the OpenVMS operating system media and select the option to install
layered products, the installation procedure for the selected layered product(s) does not run the
Installation Verification Procedure (IVP) for layered products. Because the operating system is
booted from the media and the layered products are installed on a different device (the target
drive), the IVPs cannot execute correctly. However, you can run the IVP for each layered product
after you boot the target system (see the layered product installation documents for information
about running the IVP).
1.4.4 Using the Show Installed Products Option (4)
Use option 4 on the operating system main menu to display a list of products that have been
installed on a selected target disk by the PCSI utility. Products that were installed by VMSINSTAL
or other installation methods do not appear in this display unless they have been registered in
the PCSI utility’s product database.
The following is a sample display of the prompts and information that appear when you select
option 4. WBEM Services for OpenVMS and WBEM Providers for OpenVMS are available on
OpenVMS I64 systems only. The version numbers in this example do not necessarily reflect the
version numbers of the products actually shipped with OpenVMS Version 8.3-1H1.
You must enter the device name for the system disk for which
you want to display installed products.
If you enter an invalid device or one which is not a system disk
an error will occur.
(Enter "^" and press Return to return to main menu.)
Enter device name for system disk: [DKB300] (? for choices) DKB300
%MOUNT-I-MOUNTED, V82SYS mounted on _DKB300:
The default is an 80-column display that does not include
Maintenance (patches) or Referenced by information.
Do you want the full, 132-column display? (Yes/No) [No] NO
------------------------------------- ------------ ------------
PRODUCT KIT TYPE STATE
------------------------------------- ------------ ------------
HP I64VMS AVAIL_MAN_BASE V8.3-1H1 Full LP Installed
HP I64VMS CDSA V2.3-306 Full LP Installed
HP I64VMS DECNET_PLUS V8.3-1H1 Full LP Installed
HP I64VMS DWMOTIF V1.6 Full LP Installed
HP I64VMS DWMOTIF_SUPPORT V8.3-1H1 Full LP Installed
HP I64VMS KERBEROS V3.1-152 Full LP Installed
HP I64VMS OPENVMS V8.3-1H1 Platform Installed
HP I64VMS TCPIP V5.6 Full LP Installed
HP I64VMS VMS V8.3-1H1 Oper System Installed
HP I64VMS SSL V1.3-284 Full LP Installed
HP I64VMS TDC_RT V2.3-1 Full LP Installed
HP I64VMS WBEMCIM V2.61-A070728 Full LP Installed
HP I64VMS WBEMPROVIDERS V1.5-31 Full LP Installed
------------------------------------- ------------ ------------
12 items found
Do you wish to display product history? (Yes/No) [No] YES
----------------------------------- ----------- ----------- --------------------
PRODUCT KIT TYPE OPERATION DATE AND TIME
----------------------------------- ----------- ----------- --------------------
HP I64VMS AVAIL_MAN_BASE V8.3-1H1 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS CDSA V2.3-306 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS DECNET_PLUS V8.3-1H1 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS DWMOTIF V1.6 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS KERBEROS V3.1-152 Full LP Install 25-SEP-2007 18:04:23
HP I64VMS OPENVMS V8.3-1H1 Platform Install 25-SEP-2007 18:04:23
38 Getting Started