Installation and Upgrade Guide

1.4.2 Using the Display Layered Products Option (2)
Use option 2 to display layered products that can be installed.
NOTE: Although option 2 displays any patch kits available from the OpenVMS distribution
media, HP recommends using option 7 to display patch kits; option 7 enables you to specify
locations to search in addition to the standard location.
When you select option 2 on the operating system main menu, the following information is
displayed:
• The version of OpenVMS and versions of the required components and optional products
that can be installed or upgraded when you select option 1 on the main menu.
• The layered product kits that are available for installation when you select option 3 on the
operating system main menu. The DECwindows graphical user interface and HP networking
products are shown again, along with other layered products.
NOTE: The two lists of products (the products that can be installed or upgraded and the layered
product kits available for installation) might be the same or very similar. Generally, products
that can be installed or upgraded along with the OpenVMS operating system should be installed
or upgraded with the OpenVMS operating system.
The following is an example of a display. WBEMCIM is the file name used in the PCSI kit for
the WBEM Services for OpenVMS product, which is available on OpenVMS I64 systems only.
CIM stands for the Common Information Model, which differentiates the current OpenVMS
WBEM product from the original one that is based on the Simple Network Maintenance Protocol
(SNMP). The version numbers in this example do not necessarily reflect the version numbers of
the products actually shipped with OpenVMS Version 8.3-1H1.
The following versions of the OpenVMS operating system,
required components and optional other products
are available on the OpenVMS distribution media (CD/DVD).
They can be installed by selecting option 1:
HP I64VMS VMS version V8.3-1H1
HP I64VMS AVAIL_MAN_BASE V8.3-1H1
HP I64VMS CDSA version V2.3-306
HP I64VMS KERBEROS version V3.1-152
HP I64VMS SSL V1.3-284
HP I64VMS TDC_RT version V2.3-1
HP I64VMS WBEMCIM version V2.61-A070728
HP I64VMS WBEMPROVIDERS version V1.5-31
HP I64VMS DWMOTIF version V1.6
HP I64VMS DECNET_PLUS version V8.3-1H1
HP I64VMS DECNET_PHASE_IV version V8.3-1H1
HP I64VMS TCPIP version V5.6
The following Layered Product kits are available on the OpenVMS
Distribution media (CD/DVD). They can be installed by selecting
option 3. If they are already installed, they can be reconfigured
by selecting option 5, or removed by selecting option 6.
----------------------------------- ----------- ----------
PRODUCT KIT TYPE KIT FORMAT
----------------------------------- ----------- ----------
HP I64VMS AVAIL_MAN_BASE V8.3-1H1 Full LP Compressed
HP I64VMS CDSA V2.3-306 Full LP Compressed
HP I64VMS DECNET_PHASE_IV V8.3-1H1 Full LP Compressed
HP I64VMS DECNET_PLUS V8.3-1H1 Full LP Compressed
HP I64VMS DWMOTIF V1.6 Full LP Compressed
1.4 Using the Operating System Menu 35