Installation and Upgrade Guide

NOTE: HP recommends that you do not install any other licenses, including OpenVMS
licenses, on this alternate system. You can use the system only from the console.
4. Mount the system disk and any output devices you plan to use during the backup or restore
operations. See Section E.5.2 (page 250) for more information.
5. Perform the necessary backup or restore operations by entering the appropriate BACKUP
commands. For examples of using the BACKUP command to back up the system disk, see
Section E.4.3 (page 248); for examples of using the BACKUP command to restore the system
disk, see Section E.5.3 (page 250).
6. Shut down the system.
7. Boot from your original system disk.
E.6 Alternative Backup and Restore Procedure (Minimum OpenVMS Environment) 253