Installation and Upgrade Guide

1. First, to determine whether your system's iLO 2 MP has been discovered, access the HP SIM
home page and select System and Event Collections→All Management Processors in
the lefthand panel. The following is an example of an HP SIM All Management Processors
listing. If your system is listed with the proper port IP address and identification, you are
ready to provision. (HP SIM identifies such properties as the type of system, which in this
case is Management Processor [MP], the operating system and version, and the product
name.) If your MP is not listed, then perform a manual discovery, as described in the next
few steps.
NOTE: If your iLO 2 MP is connected properly and turned on, HP SIM should discover
it. If your port is not discovered, check LAN cable connections and proper port configuration,
referring to the HP BladeSystem Onboard Administrator User Guide or the HP Integrity iLO 2
MP Operations Guide. Check the HP SIM documentation for discovery problems related to
HP SIM.
C.1 HP SIM Provisioning of OpenVMS 215