Installation and Upgrade Guide

Do you want to continue (Yes/No) [YES]?:
%WBEMCONFIG-I-CREREPBEGIN, Create Repository Begins...
%WBEMCONFIG-I-CREREPCOMPLETE, Create Repository Complete.
This utility creates:
SYS$STARTUP:WBEM_Services$Startup.com
which should be added to SYS$STARTUP:SYSTARTUP_VMS.COM.
This utility creates:
SYS$STARTUP:WBEM_Services$Shutdown.com
which should be added to SYS$STARTUP:SYSHUTDWN.COM.
This utility creates:
SYS$SYSROOT:[wbem_services]WBEM_Services$Define_Commands.com
which users who use this product can add to their login.com.
3. The utility asks whether to start the CIMServer:
Do you want to start the CIMServer now (Yes/No) [Yes]?:
CIMServer must be running so that your system can use such applications as Instant Capacity,
Pay per use, and gWLM. You can start CIMServer now, or you can perform other
postinstallation or postupgrade tasks first and then start CIMServer. If you choose to start
CIMServer now, the utility displays the progress and operating system information, as in
the following example:
%RUN-S-PROC_ID, identification of created process is 21A00599
%WBEMCIM-I-STARTUPWAIT, Waiting for CIMServer to start... 120 seconds remaining.
%WBEMCIM-S-CSSTARTED, CIMServer successfully started.
OperatingSystem Information
Host: boston.hp.com
Name: OpenVMS
Version: V8.3-1H1
UserLicense: Unlimited user license
Number of Users: 1 users
Number of Processes: 29 processes
OSCapability: 64 bit
LastBootTime: Jul 31, 2007 10:52:55 (-0400)
LocalDateTime: Aug 3, 2007 10:14:58 (-0400)
SystemUpTime: 256923 seconds = 2 days, 23 hrs, 22 mins, 3 secs
4. To ensure that CIMServer starts automatically at each reboot, add the following line to the
SYS$MANAGER:SYSTARTUP_VMS.COM file:
$ @SYS$STARTUP:WBEM_Services$Startup.com
To have CIMServer shut down automatically with the operating system, add the following
line to the SYS$MANAGER:SYSSTARTUP:SYSHUTDWN.COM file:
$ @SYS$STARTUP:WBEM_Services$Shutdown.com
All users who use this product should also add the following line to their LOGIN.COM file:
$ @SYS$STARTUP:WBEM_Services$Define_Commands.com
5. In an OpenVMS Cluster, each member that runs WBEM Services for OpenVMS needs its
own repository. Therefore, you must perform the WBEM Services for OpenVMS configuration
procedure on each of those cluster members.
7.8.5.2 Configuring WBEM Services for OpenVMS (Where Configured Previously)
To configure WBEM Services for OpenVMS on a system where it has been configured previously,
follow these steps:
7.8 Initializing or Configuring Other Installed Components 129