OpenVMS Pathworks 32

HP PATHWORKS 32 V7.4 SPD 56.33.10
DECnet Over TCP/IP Requirements
• OpenVMS Operating System for Alpha V6.2-1HX,
V7.3-2, V8.2, or V8.3
– DECnet-Plus V6.2-1HX, V7.3-2, V8.2 or V8.3 for
OpenVMS Alpha
• OpenVMS Operating System for VAX V6.2 or V7.3
– DECnet-Plus V6.2 or V7.3 for OpenVMS VAX
• Tru64 UNIX Operating System V5.1B-3 or V5.1B-4
– DECnet-Plus for Tru64 UNIX V5.1A
For more information, visit the following website:
http://h71000.www7.hp.com/openvms
/openvms_supportchart.html
Disk Space Requirements
PATHWORKS 32 software is stored on the PC’s local
storage device.
A CD-ROM reader is required on at least one system
in the network to load the software. Installation can
be performed from the local drive or from the server
system.
The minimum disk space required for the installation of
PATHWORKS 32 software is as follows:
Network Connectivity components (Typical Install) 6 MB
1
eXcursion X Server (Express Installation) 25 MB
2
PowerTerm 525 terminal emulator 15 MB
1
Disk space requirements for individual PCs vary, depending on the configura-
tion. Local language variants require approximately 350 KB per language.
2
This number is for the installation of eXcursion and its default fonts. More
disk space is required to install additional fonts.
Network Connections Support
PATHWORKS 32 software supports any of the connec-
tions shown in Table.
Table 1
LAN Connections
Datalink Transport
Ethernet DECnet, LAT
FDDI DECnet, LAT
Network Adapter Card Support
PATHWORKS 32 software adheres to the following
standards:
• Windows 2000 — NDIS V5.0
• Windows XP — NDIS V5.0
• Windows 2003 — NDIS V5.1
Every effort has been made to ensure that the software
adheres to the interfaces documented in these stan-
dards; however, because individual vendors’ interpre-
tations of these specifications can vary, some applica-
tions might not function in the PATHWORKS 32 network
environment.
PATHWORKS 32 supports the basic networking ser-
vices that allow a protocol module to communicate over
a network device.
NDIS 5.0 and 5.1 extensions of Task Off-loading, Plug
and Play, hardware instrumentation, Wireless Adapters,
Intelligent NIC Cards and I/O Device Virtualization are
not supported.
PATHWORKS 32 software requires a Windows 2000,
Windows XP Professional, or Windows 2003 supported
Ethernet or FDDI adapter and driver.
FDDI drivers must be configured to emulate Ethernet.
The FDDI MaxFrameSize parameter must be set to a
value of 1498 or less.
ORDERING INFORMATION
Software Licensing
You must have a PATHWORKS 32 system license for
each PC using any portion of the PATHWORKS 32 soft-
ware package. You can get these licenses in one of the
following ways:
• For new users who do not need a license to access
PATHWORKS servers, order HP PATHWORKS 32
System license(s) as follows:
QM–5LKAA–AB — 1 license
QM–5LKAA–AC — 10 licenses (1 PAK)
QM–5LKAA–AD — 25 licenses (1 PAK)
QM–5LKAA–AE — 50 licenses (1 PAK)
QM–5LKAA–AF — 100 licenses (1 PAK)
QM–5LKAA–AG — 250 licenses (1 PAK)
QM–5LKAA–AH — 500 licenses (1 PAK)
QM–5LKAA–AJ — 1000 licenses (1 PAK)
If you have proof-of-license for any prior version of
PATHWORKS 32 or for any version of any one of
the following licenses, you can purchase an Upgrade
license to HP PATHWORKS 32 V7.4:
– PATHWORKS for DOS and Windows (LAN
Manager) CCS
– PATHWORKS for DOS and Windows (NetWare)
CCS
– PATHWORKS for DOS and Windows CNS
– PATHWORKS for Windows NT (LAN Manager)
CCS
5