HP OpenVMS for Integrity Servers and HP OpenVMS Alpha Version 8.2

HP OpenVMS for Integrity Servers and HP OpenVMS Alpha Version 8.2 Operating Systems SPD 82.35.01
• ANSI X3.131-1994 (SCSI II): Small Computer
System Interface
• ANSI/IEEE 802.2-1985: Logical Link Control
• ANSI/IEEE 802.3-1985: Carrier Sense Multiple
Access with Collision Detection
• FIPS 1-2: Code for Information Interchange, Its
Representations, Subsets, and Extensions
Note: 1-2 includes ANSI X3.4-1977(86)/FIPS 15;
ANSI X3.32-1973/FIPS 36; ANSI X3.41-1974/FIPS
35; and FIPS 7.
• FIPS 3-1/ANSI X3.22-1973: Recorded
Magnetic Tape Information Interchange (800 CPI,
NRZI)
• FIPS 16-1/ANSI X3.15-1976: Bit Sequencing of the
Code for Information Interchange in Serial-by-Bit
Data Transmission
Note: FED STD 1010 adopts FIPS 16-1.
• FIPS 22-1/ANSI X3.1-1976: Synchronous Signaling
Rates Between Data Terminal and Data Communi-
cation Equipment
Note: FED STD 1013 adopts FIPS 22-1.
• FIPS 25/ANSI X3.39-1986: Recorded Magnetic Tape
for Information Interchange (1600 CPI, Phase En-
coded)
• FIPS 37/ANSI X3.36-1975: Synchronous High-
Speed Data Signaling Rates Between Data Terminal
Equipment and Data Communication Equipment
Note: FED STD 1001 adopts FIPS 37.
• FIPS 50/ANSI X3.54-1986: Recorded Magnetic Tape
for Information Interchange, 6250 CPI (246 CPMM),
Group Coded Recording
• FIPS 79/ANSI X3.27-1987: Magnetic Tape Labels
and File Structure for Information Interchange
• FIPS 86/ANSI X3.64-1979: Additional Controls for
Use with American National Standard Code for In-
formation Interchange
Note: Other FIPS are not applicable.
Note: Information regarding interchangeability of
ANSI and FED standards with FIPS is contained
in ‘‘ADP Telecommunications Standards Index,’’ July
1988, published and maintained by the General Ser-
vices Administration.
• ISO 646: ISO 7-bit Coded Character Set for Infor-
mation Exchange
• ISO 1001: File Structure and Labeling of Magnetic
Tapes for Information Interchange
• ISO 1863: Information Processing — 9-track, 12, 7
mm (0.5 in) wide magnetic tape for information inter-
change recorded at 32 rpmm (800 rpi)
• ISO 1864: Information Processing — Unrecorded 12,
7 mm (0.5 in) wide magnetic tape for information in-
terchange — 35 ftpmm (800 ftpi) NRZI, 126 ftpmm
(3 200 ftpi) phase encoded and 356 ftmm (9 042 ftpi),
NRZI
• ISO 2022: Code Extension Techniques for Use with
ISO 646
• ISO 3307: Representations of Time of the Day
• ISO 3788: Information Processing — 9-track, 12, 7
mm (0.5 in) wide magnetic tape for information in-
terchange recorded at 63 rpmm (1 600 rpt), phase
encoded
• ISO 4873: 8-Bit Code for Information Interchange —
Structure and Rules for Implementation
• ISO 5652: Recorded Magtape (6250)
• ISO 6429: Control Functions for Coded Character
Sets
• ISO 9316: 1989 (SCSI-1) Small Computer System
Interface
• ISO 9660: Information Processing — Volume and file
structure of CD–ROM for information exchange
• ISO 10288: 1994 (SCSI-2) Small Computer System
Interface
INSTALLATION
OpenVMS I64 is distributed as a binary kit on DVD.
OpenVMS Alpha is distributed as a binary kit on CD-
ROM. Procedures for setting up the system disk from
media and for preparing the system for day-to-day op-
erations are provided in the HP OpenVMS Version 8.2
Upgrade and Installation Manual. The procedures use
the POLYCENTER Software Installation (PCSI) utility to
configure and install the OpenVMS Alpha and Open-
VMS I64 operating systems.
POLYCENTER Software Installation
The POLYCENTER Software Installation utility simplifies
the installation and management of OpenVMS products.
It is used to install, update, and deinstall software prod-
ucts that have been prepared with the utility. In addi-
tion, the utility provides a database to track the installa-
tion, reconfiguration, and deinstallation of software. For
products installed with other installation technologies,
the utility provides a mechanism for adding information
about them into the product database. The utility also
provides the ability to manage dependencies between
products during the installation process.
16