HP DECprint Supervisor (DCPS) for OpenVMS, Version 2.7 (SPD 44.15.20)

HP DECprint Supervisor (DCPS) for OpenVMS, SPD 44.15.20
Version 2.7
Phaser 750
1
Phaser 780
1
Phaser 850
1
• Xerox
DocuPrint N2025
DocuPrint N2125
DocuPrint N24
DocuPrint N2825
DocuPrint N32
DocuPrint N3225
DocuPrint N40
DocuPrint N4025
DocuPrint N4525
Phaser 4500
6
Phaser 4510
6
Phaser 5500
6
Phaser 6250
6
Phaser 7300
6
Phaser 7750
6
Phaser 8400
6
WorkCentre Pro 232
6
WorkCentre Pro 238
6
WorkCentre Pro 245
6
WorkCentre Pro 255
6
WorkCentre Pro 265
6
WorkCentre Pro 275
6
WorkCentre Pro 35
6
WorkCentre Pro 45
6
WorkCentre Pro 55
6
WorkCentre Pro 65
6
WorkCentre Pro 75
6
WorkCentre Pro 90
6
WorkCentre Pro C2128
6
WorkCentre Pro C2636
6
WorkCentre Pro C3545
6
A supported printer must be equipped with one or more
of the following supported interconnects:
• Ethernet port or Network Interface Card (NIC) sup-
porting CPAP, LAT, bidirectional Raw TCP/IP socket
or LPD protocol
• EIA-232 (RS-232) serial port
• EIA-422 (RS-422) serial port
• Bidirectional Centronics parallel port connected
through a print server or terminal server
Note: DCPS does not support the following types of
printer connections:
— A unidirectional connection (for example, a parallel
or Raw TCP/IP port that is unidirectional)
— The parallel port on an OpenVMS system
— The Telnet network protocol
The following notes apply when using the above inter-
connects:
• EIA-232 serial interfaces are optional with some
printers and may need to be purchased separately.
• EIA-422 serial interfaces, such as that employed on
the HP PaintJet XL300, require an EIA-422/EIA-232
converter/adapter.
• The HP LaserJet 4SiMX is supported for serial com-
munication when equipped with the Extend Systems
ESI-2633A interface card.
• Ethernet interfaces may require an adapter to con-
nect the printer’s Ethernet hardware to that of the
local area network.
• Ethernet protocols supported for certain Desktop and
Workgroup printers (not including PrintServer print-
ers) are Raw TCP/IP socket, LPD and LAT.
• Ethernet protocols supported for DIGITAL PrintServer
printers are DECnet CPAP and TCP/IP CPAP.
For TCP/IP configurations, the following are required:
• At least one printer (listed above)
• A NIC, print server or terminal server that provides
bidirectional Raw TCP/IP sockets or LPD.
A cable may also be required to connect the printer to
a print server or terminal server.
For Serial Line configurations, the following are re-
quired:
• At least one printer (listed above)
• Serial interface and cable for EIA-232 or EIA-422 with
converter/adapter
• One of the following serial interfaces or servers:
— CVAX serial interface (CXA16, CXB16, CX08,
DZQ-11; 9600 baud)
— DHV11 (9600 baud; serial interface)
— DZQ11 (9600 baud; serial interface)
— DLV11 (9600 baud; serial interface)
— DHU11 (9600 baud; serial interface)
— DMZ32 (4800 baud; serial interface)
— DMF32 (9600 baud; serial interface)
— DMB32 (9600 baud; serial interface)
— DECserver 90L and 90L+ (38.4K baud; LAT)
— DECserver 90M (57.6K baud; LAT and raw
TCP/IP socket)
— DECserver 90TL (57.6K baud; LAT and raw
TCP/IP socket)
— DECserver 100 (9600 baud; LAT)
6