Manual

Alerts
The following table provides the details on the alerts available in the management packs.
HP BladeSystem
Management Pack
HP OneView Enclosure
Management Pack
SummaryEvent ID
A rack enclosure has overheated.22005
A rack enclosure is overheating.22006
A rack power supply has failed.22013
A rack power supply has degraded.22014
A rack power subsystem is not redundant.22018
A rack power subsystem input has a voltage
problem.
22019
A server blade group has a capper error.22055
A rack power subsystem is overloaded.22020
An Onboard Administrator has degraded.22037
A rack enclosure fan has failed.22008
A rack enclosure fan has degraded.22009
An Onboard Administrator role has changed
to Primary.
22041
A Server blade e-keying has failed.22042
The interconnect has failed.22046
The interconnect has degraded.22047
A test alert has been sent.11003
Additional information
For more information on transitioning from Virtual Connect modules to HP OneView, refer to the
whitepaper, Transitioning a Virtual Connect Configuration to HP OneView.
Differences between HP OneView Management Packs and existing HP Management Packs 65