Manual

Using the OmniBook
Expanding the OmniBook
Setup Guide 29
Expanding the OmniBook
To install RAM modules
The OmniBook provides an optional memory expansion slot for installing up to two
RAM expansion modules.
Your OmniBook’s computer chips are extremely static-sensitive. Static electricity
can permanently damage computer chips. Carefully read the following caution
information.
You’ll need a small Phillips screwdriver to complete this procedure.
1. Click the Start Button and select Shut down.
2. Unplug the AC adapter, if present, and remove the battery.
3. Remove the RAM expansion cover located on the bottom of the OmniBook
using a Phillips screwdriver.
4. Insert the RAM expansion module into the connector at about a 30° angle until
it’s fully inserted. Then press down at both sides of the module until it latches.