Instruction Manual

Using OmniBook Accessories
Installing and Removing Accessories
1-8
To remove accessories from the OmniBook
The OmniBook’s center drive bay can hold a CD-ROM drive, a floppy-disk drive, or a
high-capacity (2nd) battery for extra power.
Use this procedure to remove any of these accessories.
1. Slide the switch to the right. A pull-tab pops out.
2. Pull the pull-tab firmly to remove the module from the OmniBook.
CAUTION
To prevent damage to the pull-tab, gently push the tab back into the module
after you remove it from the OmniBook.
High-capacity battery
CD-ROM drive
Floppy disk drive
Floppy disk drive