Owner's manual

Troubleshooting
7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW
1-24
CD-ROM drive problems
If the CD-ROM drive stops responding
• Remove and reinsert the CD disk.
• Restart the OmniBook.
• If restarting the OmniBook does not solve the problem, remove and reinsert the
CD-ROM module.
If you cannot boot from a CD in the CD-ROM drive
• Check that the CD is bootable.
• Restart the OmniBook.
• Remove and reinsert the CD-ROM module.
• Run the BIOS Setup utility to make sure that the CD-ROM drive is the first boot
devices. See the OmniBook Reference Guide for instructions on running the
BIOS Setup utility.
LS-120 drive problems
If the LS-120 drive doesn’t work
• Remove and reinsert the LS-120 disk.
• Restart the OmniBook.
• Remove and reinsert the LS-120 module.
• If you are using Windows NT, look for information about updated LS-120 NT
drivers in the readme file on the floppy disk included with your LS-120 drive.
You can also connect to the OmniBook website for updated drivers at
http://www.hp.com/omnibook.