Manual

Using OmniBook Plug-In Modules
Using the CD-ROM Drive
1-11
Using the CD-ROM Drive
To use both the CD-ROM drive and the floppy disk drive, connect the floppy disk
drive to the OmniBook’s parallel port.
This section describes how to
♦ Insert or remove a CD.
♦ Use the CD-ROM drive safely.
♦ Open the CD-ROM drive manually.
To insert or remove a CD
CAUTION
Do not insert or remove a CD while the OmniBook is actively reading data.
Otherwise, the OmniBook could stop responding and you could lose data.
1. Press the button on the face of the CD-ROM drive.
2. Place the CD into the drive (label facing up) and gently press down to seat the
CD on the spindle.
--or--
Remove the CD.
3. Close the door to the drive.
Open button